I replaced my motor last season. You can see my installation at ahsovereignty.com. If you have questions, I will be happy to answer them. David Hoyt Sovereignty Catalina 27 # 65 In a message dated 2/20/2010 9:47:55 P.M. Eastern Standard Time, [email protected] writes:
I've got an 8 HP Mercury 2 cycle in the transom cutout of my '74 Cat 27. The motor is a late 80s model. A bit underpowered, I'd like to update to a 9.9 4 stroke someday, but this motor runs well. It fits. Rob Kay --- In [email protected]_ (mailto:[email protected]) , "Michael Bowick" <bowickelect...@bow> wrote: > > John McLaughlin has a 10hp mounted on "Loose Change". He has posted pictures on this website. John, if you read this messgae would you please let us know if you had to modify you transom to raise the engine out of the water, > . > > Thanks, Mike > ----- Original Message ----- > From: j...@... > To: [email protected]_ (mailto:[email protected]) > Sent: Wednesday, February 10, 2010 8:42 PM > Subject: Re: [IC27A] Re: Replacing the outboard on a 1977 Catalina 27 > > > > My Honda 9.9 4 stroke (about 5 years old) would fit if you used a sawsall first. It is way too big. > Joe McCary > Aeolus II > Sent from my Verizon Wireless BlackBerry > > -----Original Message----- > From: "mujin2000" mujin2...@.. > Date: Thu, 11 Feb 2010 04:31:26 > To: [email protected]_ (mailto:[email protected]) > Subject: [IC27A] Re: Replacing the outboard on a 1977 Catalina 27 > > OK so from what I've heard so far > There are two motors reputed to fit the existing cutout in the transom: > > * The Yamaha 9.9 high thrust motor > * The Honda Classic (Suggested when I called Catalina) although I > haven't found a 4 stroke Honda with Classic in its name. > > I've yet to hear directly from anyone that can personally confirm either > of these motors. > > Most have used a mounting bracket and all of these installations used > remote controls. > > > > > --- In [email protected]_ (mailto:[email protected]) , "mujin2000" mujin2000@ wrote: > > > > The old Yamaha 2str barely fit through the opening in the transom to > > tilt up. The new 4Str heads are bigger and it looks like they won't > fit. > > Using a bracket will further extend the motor aft making the controls > > inaccessible (and the remoting option is another $1k in parts + the > > labor). > > > > Is there a list of motors that will fit? > > > > Is there a known documented solution? > > > > > > [Non-text portions of this message have been removed] > > > > [Non-text portions of this message have been removed] > > > > > > > ----------------------------------------------------------- ------ > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.435 / Virus Database: 271.1.1/2680 - Release Date: 02/10/10 19:38:00 > > > [Non-text portions of this message have been removed] > [Non-text portions of this message have been removed]
