I recently replaced the lights, wiring harness, and four pin connector on my
mast. I installed the female end of the four pin connector on the wiring
harness at the mast step and the anchor light works, but the steaming/deck
light doesn't. I have power at the fuse box but there is a short somewhere
between the fuse box and the mast step. I tried replacing the electrical
connector for the steaming light at the fuse box but it still didn't work. Does
anyone have experience replacing the wiring between the fuse box and mast step?
I have the wiring diagram and it doesn't look that complicated, but I thought
I'd pick your brains before I dive into it.
Thanks
Art
Simply Eden
#5725
