Vicki I did this a few years ago. A dremel with a wire brush and a 5/8 11 thread die are the key tools. I actually did a comprehensive job following the procedures described here http://f1.grp.yahoofs.com/v1/cCAFTPfVl8saqYh7OInbuqwQqJ1__7swY_1yv6m9D4zc0RhCT5RlskaTfrRfEdgO_Ivh4xwyIAvoa5s0Y-voqE1-F0TMqePVUA/C-27_keelbolt_nut_replacement.pdf
Hope that helps, good luck Peter Z Snagglepuss #2622 -----Original Message----- From: VickiB <[email protected]> To: [email protected] Sent: Mon, May 31, 2010 2:59 pm Subject: [IC27A] How do I get off gunk from a keel bolt? So 3 of our nuts are rusted out and we are trying to get all of the old gunk and rust off of the bolt but it is proving very difficult. Any ideas? Thanks Vicki
