Not mine I forget who did it, but I think his boat was named Beau Gust. Cheers PZ
-----Original Message----- From: Judith Blumhorst, DC <[email protected]> To: [email protected] Sent: Tue, Jun 1, 2010 12:04 pm Subject: Re: [IC27A] How do I get off gunk from a keel bolt? Nice write-up, Peter! From: "[email protected]" <[email protected]> To: [email protected] Sent: Tue, June 1, 2010 8:08:50 AM Subject: Re: [IC27A] How do I get off gunk from a keel bolt? Vicki I did this a few years ago. A dremel with a wire brush and a 5/8 11 thread die are the key tools. I actually did a comprehensive job following the procedures described here http://f1.grp. yahoofs.com/ v1/cCAFTPfVl8saq Yh7OInbuqwQqJ1_ _7swY_1yv6m9D4zc 0RhCT5RlskaTfrRf EdgO_Ivh4xwyIAvo a5s0Y-voqE1- F0TMqePVUA/ C-27_keelbolt_ nut_replacement. pdf Hope that helps, good luck Peter Z Snagglepuss #2622 -----Original Message----- From: VickiB <offmgr...@yahoo. com> To: ic...@yahoogroups. com Sent: Mon, May 31, 2010 2:59 pm Subject: [IC27A] How do I get off gunk from a keel bolt? So 3 of our nuts are rusted out and we are trying to get all of the old gunk and rust off of the bolt but it is proving very difficult. Any ideas? Thanks Vicki Vicki I did this a few years ago. A dremel with a wire brush and a 5/8 11 thread die are the key tools. I actually did a comprehensive job following the procedures described here http://f1.grp. yahoofs.com/ v1/cCAFTPfVl8saq Yh7OInbuqwQqJ1_ _7swY_1yv6m9D4zc 0RhCT5RlskaTfrRf EdgO_Ivh4xwyIAvo a5s0Y-voqE1- F0TMqePVUA/ C-27_keelbolt_ nut_replacement. pdf Hope that helps, good luck Peter Z Snagglepuss #2622 -----Original Message----- From: VickiB <offmgr...@yahoo. com> To: ic...@yahoogroups. com Sent: Mon, May 31, 2010 2:59 pm Subject: [IC27A] How do I get off gunk from a keel bolt? So 3 of our nuts are rusted out and we are trying to get all of the old gunk and rust off of the bolt but it is proving very difficult. Any ideas? Thanks Vicki
