I just tried to open the link and it wont open - can you send it to me directly - [email protected] ThanksVicki
--- On Tue, 6/1/10, Judith Blumhorst, DC <[email protected]> wrote: From: Judith Blumhorst, DC <[email protected]> Subject: Re: [IC27A] How do I get off gunk from a keel bolt? To: [email protected] Date: Tuesday, June 1, 2010, 12:04 PM Nice write-up, Peter! From: "peterbzahn@ aol.com" <peterbz...@aol. com> To: ic...@yahoogroups. com Sent: Tue, June 1, 2010 8:08:50 AM Subject: Re: [IC27A] How do I get off gunk from a keel bolt? Vicki I did this a few years ago. A dremel with a wire brush and a 5/8 11 thread die are the key tools. I actually did a comprehensive job following the procedures described here http://f1.grp. yahoofs.com/ v1/cCAFTPfVl8saq Yh7OInbuqwQqJ1_ _7swY_1yv6m9D4zc 0RhCT5RlskaTfrRf EdgO_Ivh4xwyIAvo a5s0Y-voqE1- F0TMqePVUA/ C-27_keelbolt_ nut_replacement. pdf Hope that helps, good luck Peter Z Snagglepuss #2622 -----Original Message----- From: VickiB <offmgr...@yahoo. com> To: ic...@yahoogroups. com Sent: Mon, May 31, 2010 2:59 pm Subject: [IC27A] How do I get off gunk from a keel bolt? So 3 of our nuts are rusted out and we are trying to get all of the old gunk and rust off of the bolt but it is proving very difficult. Any ideas? Thanks Vicki
