i'm not having enough ram
On 2/1/09, Kurian John <[email protected]> wrote: > > Junise, > > Did you try the options in Syam's first mail? Boot into a LiveCD (in IDE > SCSI mode) and re-install GRUB to /dev/sda? > > If that doesn't work, a re-install of Windows with SATA drivers might be > the only solution. > > Also, can you post the exact error message you receive when you try to boot > Windows in RAID mode? > Guys, can it something which could be fixed by tweaking boot.ini? > > And if running TurboC++ is your only requirement for running Windows, why > don't you try a virtualized DOS/FreeDOS? > > If you reach a point where there is no other way but to re-install windows, > you can create a virtual machine running Windows. That would solve all your > problems, right? > (Assuming you have a pretty good processor and enough RAM, that is :) ) > > Regards, > Kurian > > On Sun, Feb 1, 2009 at 10:04 AM, junise safvan <[email protected]> wrote: > >> ya.... >> windows in (hd0,0)..... >> i have downloaded the sata driver. >> but how could i enter to windows when the RAID mode is not accepting >> windows and the IDE mode is not even showing grub >> >> On Sun, Feb 1, 2009 at 10:00 AM, Syam <[email protected]> wrote: >> >>> >>> >>> On Sun, Feb 1, 2009 at 9:55 AM, Prasad SR <[email protected]> wrote: >>> >>>> Nop try installing SATA drivers in windows >>> >>> >>> That shouldv'e been done during install. Now that he can't boot in to >>> Windows, how to do that? >>> Junise, is Windows installed in the very first partition of your HDD? >>> (hd0,0) indicates that. >>> If that's not correct, change it to reflect the partition scheme. When >>> the grub menu shows, press 'e' to edit the entry, change it, then hit Enter. >>> And then 'b' to boot using the modified entry. >>> >>> >>> >>> -- >>> Regards, >>> >>> Syam >>> [email protected] >>> >>> >>> >>> >>> >> >> >> >> -- >> >> junise safvan >> project guidance on vhdl, image processing, embedded system designing etc >> >> >> >> >> > > > > > -- junise safvan project guidance on vhdl, image processing, embedded system designing etc --~--~---------~--~----~------------~-------~--~----~ "Freedom is the only law". "Freedom Unplugged" http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups "ilug-tvm" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~----------~----~----~----~------~----~------~--~---
