On 29/10/02 4:41 pm, "Alan Sargent" <[EMAIL PROTECTED]> wrote:
> At 10:20 AM 29/10/02 +0000, Steve Holroyd srh-at-holsoft.demon.co.uk wrote: >> >>> Tue Oct 29 01:32:55 2002 : Terminating on signal 15. >>> Tue Oct 29 01:32:55 2002 : ipcp: down >>> Tue Oct 29 01:32:56 2002 : sent [LCP TermReq id=0x2 "User request"] >>> Tue Oct 29 01:32:56 2002 : rcvd [LCP TermAck id=0x2] >>> Tue Oct 29 01:32:56 2002 : Connection terminated. >>> Tue Oct 29 01:32:56 2002 : Connect time 71.1 minutes. >>> Tue Oct 29 01:32:56 2002 : Sent 2262104 bytes, received 8522271 bytes. >>> Tue Oct 29 01:32:58 2002 : CCLWrite : *** >>> Tue Oct 29 01:32:59 2002 : CCLMatched : OK\13\10 >>> Tue Oct 29 01:32:59 2002 : CCLWrite : ATH\13 >>> Tue Oct 29 01:33:14 2002 : CCLWrite : ***ATH\13 >>> Tue Oct 29 01:33:17 2002 : CCLWrite : ***ATH\13 >>> Tue Oct 29 01:33:20 2002 : CCLWrite : ***ATH\13 >>> Tue Oct 29 01:33:23 2002 : CCLWrite : AT&F\13 >>> Tue Oct 29 01:33:24 2002 : disconnect script failed > > > I could be wrong, but it looks to me as if it has already disconnected (at > 1:32:56), and subsequently keeps trying to disconnect, and that's what's > failing. > > Do you have a phone on this line that you can listen to hear if the modem > connection is down -- you should then hear a dial tone. Yes - checked this. No dialtone until after the final entry. It appears that, once the acknowledgement has been made to the command string, the modem refuses to respond to the ATH commands. > > Also, you can try "Zterm", a terminal app (there's a version for OSX). See > if you can talk to the modem immediately after sending the disconnect -- > just type "AT" and see if you get back an OK, that means it has returned to > command mode. Zterm could not make contact with the modem while I was on-line so I could not check whether it would respond to an "AT". I would be intrigued to find out whether any other dial-up users with a similar system to mine have the same problems with the default script. For all I know, it may be a UK thing, or simply an incorrect S-register entry. If I can dig out the script that came with 10.1.5 I might also have a look at that (it may have had problems maintaining a connection but it always dropped the line successfully with no errors reported). As I have said before, an irritation rather than a real problem.... -- Steve -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:imac-list@;mail.maclaunch.com> To unsubscribe, email: <mailto:imac-list-off@;mail.maclaunch.com> For digest mode, email: <mailto:imac-list-digest@;mail.maclaunch.com> Subscription questions: <mailto:listmom@;lemlists.com> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
