Brand new eMac (OSX 10.3.5) . Hooked up via Enet to Linksys cable/DSL router to (Cox) cable modem. Followed below procedure, no joy. Yes the enet cable is in the proper connector, yes there is a signal to the cable.
Went into SYSTEM PREFERENCES > NETWORK > BUILT-IN ETHERNET > TCP/IP: Automatic Built-in Ethernet
Using DCHP IP Adress: Subnet Mask: Router:
Above are all blank until I hit <Apply Now> button, then "appropriate" info fills in. But still cannot connect. Also hit <Renew DHCP Lease> still no connection.
I am pretty sure the "problem" is with me not being able to see the obvious. Are there any proxies (Use passive FTP mode) checked, other buttons, things that would cause the no connection problem?
The Enet cable and connection were working for a just moved HP Pavillion. I don't want to mees with the router settings and mess up the other compter (PC). My iBook (OSX 10.3.5) works fine on this connection.
Any help would be appreciated.
Thanks, MRay
-- The iMac List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
