Re: [IMail Forum] Urgently for PIX firewall!!!

[Magdy H. Ibrahim]

Thanx Harry for your explaination, It's really helpfull. But I have one second about the IPs of my domains do I have to configure the domains with private IPs, then use static command to map them to outside real IPs? the second question is: How can I configure my DNS server if I put it behind the PIX... and to which IP the MX record must point to....   Thanx again   Magdy       ----- Original Message ----- From: Harry Palmer To: [EMAIL PROTECTED] Sent: Monday, April 09, 2001 4:16 PM Subject: RE: [IMail Forum] Urgently for PIX firewall!!! IMail works quite well inside a PIX firewall.   1.) PIX Configuration must include:     a.) Static translated addresses for each outside address to an inside address. See command "static."     b.) Conduits for each translated address for pop3 and smtp. See command "conduit."     c.) Conduits for port 8383 for each translated address for which web access is desired.     d.) You may need the line "no fixup protocol smtp" (depending upon PIX version).   2.) IMail requires no special configuration except that inside addresses are used. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Magdy H. Ibrahim Sent: Monday, April 09, 2001 8:27 AM To: [EMAIL PROTECTED] Subject: Re: [IMail Forum] Urgently for PIX firewall!!! The problem is not how to configure the PIX firewall. the problem is hor to configure Imail server behind it..   this is the problem, and that is what I asked for....   Regards,,,   Magdy   ----- Original Message ----- From: Jack Taugher To: [EMAIL PROTECTED] Sent: Monday, April 09, 2001 3:04 PM Subject: Re: [IMail Forum] Urgently for PIX firewall!!! Take PIX firewall training.  That's a basic function, but a need to understand function. ----- Original Message ----- From: Magdy H. Ibrahim To: [EMAIL PROTECTED] Sent: Monday, April 09, 2001 4:22 AM Subject: [IMail Forum] Urgently for PIX firewall!!! Hi there,,,   couple of weeks ago I send you for advise for installing Imail server behind the PIX firwall... and some guys recommanded me to some commands.... Now when I try to configure the PIX, I found a problem: My mail server hosts about 20 domain mails, each domain with it's real IP. I am planning to put my mail server on the inside interface ofcourse with private IPs... and bind the mail server with real IP is that possible to bind all the 20 domain mails to ouside real IPs. OR how can I do this .... IF NO... how can I install it with private IPs from the inside interface IPs..   Please help me sooon...   Regards,,,   Magdy