Under delivery.
On the Mail Read tab you should have Read incoming e-mail messages on port:
25
On the Mail Send tab.
Under configuration:
Send outgoing e-mail messages on port: should be the port
number you
changed Imail to listen on.
There should be a check in the box next to WebShield and the
Mail
Server are located on the same server.
Under Delivery Method I have Direct Send, Then Mail Relays, then DNS
Lookup.
Make sure there's a check mark next to the appropriate Enable
methods.
Click the Edit button next to Enable Direct Send and
enter your local
domain name twice. Once with just the domain
name and once
with a dot after it.
Edit the DNS Lookup method and enter the appropriate
DNS server info.
If you are using the Anti Spam-Relay, be sure to enter 127.0.0.1 as well as
your other IP ranges and the appropriate domains. It might be a good idea
to disable Anti Spam until you have it delivering mail and then be sure to
enable it after you get it working.
Dan
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Cynthia R.
Bacani
Sent: Friday, April 20, 2001 2:36 AM
To: [EMAIL PROTECTED]
Subject: Re: ORBSOUT: [IMail Forum] Need Urgent Help on Webshield
The mail delivery method that I used is "deliver all mail to local mail
server". Where should I specify the domain name in Webshield?
Our e-mail server is behind a firewall. I opened the ports 25 (SMTP) and
7190 (POP3). Does it has something to do with the mail rejection.
Attached is the mail log:
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
An Archive of this list is available at:
http://www.mail-archive.com/imail_forum%40list.ipswitch.com/
