thanks. I can NOT telnet to our mailsever on port 25. So now guess wehave to get the providers to unblock it ?
Thanks Mark >Have you tried to telnet to the SMTP port on you mail server from a dial-up >connection? If you can ping the mail server but not telnet to port 25, most >likely the ISP is blocking outbound SMTP. > >Bill > >-----Original Message----- >From: brain_damaged [mailto:[EMAIL PROTECTED]] >Sent: Friday, November 29, 2002 8:55 AM >To: [EMAIL PROTECTED] >Subject: [IMail Forum] ARGHHHHHHHHHh smtp auth fails but no error logs >anywere > > >I am at the end of my rope. >We are moving the users over to uunet/qwest/aleron dialup numbers. >Users can receive email but not send. Just hangs there. ERror displayed is: >Account mailserver.florida-wireless.com server:" >mailserver.florida-wireless.com" Protocol SMTP Port 25 , secure (ssl) no >socket error 10060 error number 0x800CCC0E. >Nothing in the KB on that error number. > >I tried from two different aleron numbers to send email. Same issue. Hangs >there and gives that error. > >I dialed into a different local ISP and can send out fine with outlook >express setup as >incoming/outgoing servers : mailserver.florida-wireless.com >accountname- [EMAIL PROTECTED] >checked the requires smtp auth box. >settings are use my incoming mailserver settings. > >I checked the KB. I saw the article about the cicso inspect info. We don't >have any of that in ours. > >I have tried changing every setting one way or another. I checked disable >smpt auth reporting and the other one also. I tried using IP numbers instead >of the domain names for the mailserver. > >THere is nothing in any logs as to an error for failure on user/password or >anything. > >I tracert from the dialup machines and finds the mailserver. I did a ping. >comes back with proper IP. >Dnsstuff shows the right mx records for our domain. > >I have two IMGATE machines infront of our servers. >SEtup is IMGATE--WEbshield--Imail. The logs on the IMGATE and WEbshield show >no errors either. > >The only IPs in our relay for our our IPS given to us by bellsouth. > >I removed send thru gateways, I unchecked the SSL ability boxes. > >This domain is hardwired to an IP. NOt a virtual > >setup is official hostname is florida-wireless.com >alias is mailserver.florida-wireless.com > >I am at a lost. What can be going wrong ? what is setup wrong ? >HELP please !!!!!!!!!!! >mark > >To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ > >--- >[This e-mail was scanned for viruses by Pointshare's Virus Scanning Service] > >To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
