To re-initialize LDAP requires LDAP to be running and, when you do that, it hangs the Imail control panel and the CPU utilization jumps to 100%.
About 20 minutes later it releases, LDAP still won't start on it's own and the NT Event log is filled with errors that state: "The IMail LDAP Service terminated with service-specific error 19" When I search for LDAP errors in the Ipswitch site, it states: ============================================================== Question/Problem: I recently upgraded to version 8.1 of the IMail software and I lost all of my LDAP data. It doesn't show up in IMail Administrator, and when I try to connect to the port I had previously configured IMail's LDAP service to listen on, I can't connect. I am running IMail on a Domain Controller in my Active Directory system. (There is an error in Event viewer, terminated with specific error 16.) Answer/Solution: With the addition of the OpenLDAP server, it is necessary to manually change the port this new LDAP server uses and to convert your old IMail LDAP information to the new OpenLDAP format. To do this, follow these steps: 1.) In IMail Administrator, select the LDAP service and change the port to the port previously used by the LDAP server in your earlier version of IMail. Click Apply and restart the LDAP service. 2.) Open a command prompt and navigate to the IMail directory. 3.) Type 'ldaper /CONVERT /Y' (no quotes). Note -- Depending on the amount of LDAP data to be converted, this process may take some time. DO NOT terminate the ldaper.exe application during this process. ============================================================== Don this - takes about 30 minutes, and LDAP still won't start. However, our LDAP port was, on the old version, the same as it is on this one, 389, and the above instructions recommend changing it. Doing a Google Search for LDAP NT ERROR 19 returns hundreds of results that are mostly worthless. Doing a search of well known ports, LDAP should be on 389 TCP/UDP Anyone have any other suggestions? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Bill Landry Sent: Saturday, April 30, 2005 17:55 To: [email protected] Subject: X-IMail--SPAM - VER - RDNS - SPF--None Re: [IMail Forum] IMail 8.2 on Windows NT Server Try reinitializing LDAP and then see if it starts. Bill ----- Original Message ----- From: "Bruce Barnes" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, April 30, 2005 3:15 PM Subject: Re: [IMail Forum] IMail 8.2 on Windows NT Server >I just upgraded an NT 4.0 SP6a box to 8.2 and no Queue errors, but the LDAP > refuses to start. > > No other problems. I can live without the LDAP for a week or two if I > have > to. > > Bruce > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Tripp Allen > Sent: Saturday, April 30, 2005 15:59 > To: [email protected] > Subject: Re: [IMail Forum] IMail > 8.2 on Windows NT Server > > > Are you getting any error messages from the queue manager? > > Tripp > > ----- Original Message ----- > From: "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Saturday, April 30, 2005 12:02 PM > Subject: RE: [IMail Forum] IMail 8.2 on Windows NT Server > > >> i've been running fine on an nt4 box for years...until 8.20!! now my >> queue >> manager won't start! >> >> -----Original Message----- >> From: Dan Barker <[EMAIL PROTECTED]> >> Sent: Apr 30, 2005 10:42 AM >> To: [email protected] >> Subject: RE: [IMail Forum] IMail 8.2 on Windows NT Server >> >> NT 3.51, 4, 5, or 5.1? >> >> Dan >> >> btw, I've tried all (works fine) but 3.51 and 5.1 >> >> -----Original Message----- >> From: [EMAIL PROTECTED] >> [mailto:[EMAIL PROTECTED] Behalf Of Bruce Barnes >> Sent: Saturday, April 30, 2005 10:41 AM >> To: [email protected] >> Subject: [IMail Forum] IMail 8.2 on Windows NT Server >> >> >> Is anyone running IMail 8.2 on a Windows NT server? If so, have you >> encountered any problems? >> >> Yes, I know it's now obsolete, but I may have a new customer who has his >> own >> mail server and he's still running NT on everything. He's also running >> IMail 8.0 and has an existing service agreement. >> >> Thanks in advance for any responses. >> Bruce Barnes >> >> >> To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >> List Archive: >> http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >> Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ >> >> >> To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >> List Archive: >> http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >> Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ >> >> >> To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html >> List Archive: >> http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >> Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ >> > > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ > Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ > > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ > Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ > > To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
