> Does anyone have experience running an AFS server on a machine whose
> network interface is FDDI? Are the experiences positive? Are there
> any special problems to be aware of or watch for?
> Any information would be much appreciated.
We are running AFS3.3beta server on SPARCstation 1+. It has two
network interfaces: le0(ethernet) and fddi0. The FDDI card is "CMC-950
FDDI SBus Adaptor" and configured as follows when booting:
CMC,fddi0 at SBus slot 2 0x800000 and SBus slot 2 0xa00000 pri5
CMC FDDI Sbus Adapter Driver Rev: 1.3 Hw Rev: 1.0 Fw Rev: 1.3
And we got the following error message:
"fddi0 ifioctl: unknown cmd 0xc0206916"
So when I installed AFS server, I disconnected(ifconfig down) FDDI
interface. After installation, we use both FDDI and ethernet. AFS
operation through le0 is OK (though we have still error message ...).
and I have not yet check AFS operation through fddi0 .....
---------------------------------------------
Atsushi Mitsuzawa (E-mail: [EMAIL PROTECTED])
Base Systems Architecture Laboratory
NTT Network Information Systems Laboratories
