David: Can you do the following and see whether you can get more data:
In order to help you to proceed with the installation and track down the issue you are encountering, could you please attach /tmp/install_log after running the installer from terminal window with debug mode enabled ? $ export LS_DBG_LVL=4 $ pfexec /usr/bin/gui-install Also, after installation fails, could you please attach output of following commands ? # df -h # zpool list # zpool status # zfs list # zfs mount # iostat -En # fdisk -W - c3d0p0 <---- c3d0p0 is just an example, you can run format and figure out the disk device # prtvtoc /dev/rdsk/c3d0s2 <---- same here Thanks !!! David Lee wrote: > Wow. Sorry for the extra long delay on this issue. After adding the -v to > the boot command I was able see the last command involved a mouse driver. > After some random banging on the laptop I found out that it has to do with > the laptop touch pad. After clicking the buttons on the touch pad, the > installation gave up trying to obtain control from the bios and continued > booting. > > My issue now is that the installation fails. I've attached logs and a screen > capture. If you think I should open a new thread on this please let me know. > > Thanks, > Dave > > > ------------------------------------------------------------------------ > > _______________________________________________ > install-discuss mailing list > install-discuss at opensolaris.org > http://mail.opensolaris.org/mailman/listinfo/install-discuss
