Within i915_opregion.c there are two blocks of semantically identical
ASLE response codes defined. Only one of those matches the ACPI IGD
OpRegion Specification 0.1, use those.
Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Matthew Garrett <mj...@srcf.ucam.org>
---
drivers/gpu/drm/i915/i915_opregion.c | 10 +++-------
1 files changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_opregion.c
b/drivers/gpu/drm/i915/i915_opregion.c
index 8fcc75c..ce402b2 100644
--- a/drivers/gpu/drm/i915/i915_opregion.c
+++ b/drivers/gpu/drm/i915/i915_opregion.c
@@ -114,10 +114,6 @@ struct opregion_asle {
#define ASLE_REQ_MSK 0xf
/* response bits of ASLE irq request */
-#define ASLE_ALS_ILLUM_FAIL (2<<10)
-#define ASLE_BACKLIGHT_FAIL (2<<12)
-#define ASLE_PFIT_FAIL (2<<14)
-#define ASLE_PWM_FREQ_FAIL (2<<16)
#define ASLE_ALS_ILLUM_FAILED (1<<10)
#define ASLE_BACKLIGHT_FAILED (1<<12)
#define ASLE_PFIT_FAILED (1<<14)
@@ -155,11 +151,11 @@ static u32 asle_set_backlight(struct drm_device *dev, u32
bclp)
u32 max_backlight, level, shift;
if (!(bclp & ASLE_BCLP_VALID))
- return ASLE_BACKLIGHT_FAIL;
+ return ASLE_BACKLIGHT_FAILED;
bclp &= ASLE_BCLP_MSK;
if (bclp < 0 || bclp > 255)
- return ASLE_BACKLIGHT_FAIL;
+ return ASLE_BACKLIGHT_FAILED;
blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
@@ -211,7 +207,7 @@ static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
/* Panel fitting is currently controlled by the X code, so this is a
noop until modesetting support works fully */
if (!(pfit & ASLE_PFIT_VALID))
- return ASLE_PFIT_FAIL;
+ return ASLE_PFIT_FAILED;
return 0;
}
--
1.7.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
