+/* Added for HDMI Audio */
+int i915_enable_hdmi_audio_int(struct drm_i915_private *dev_priv)
+{
+ unsigned long irqflags;
+ u32 imr, int_bit;
+ int pipe = -1;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
+
+ imr = I915_READ(VLV_IMR);
+
+ if (IS_CHERRYVIEW(&dev_priv->drm)) {
+ pipe = PIPE_C;
+ int_bit = (pipe ? (I915_LPE_PIPE_B_INTERRUPT >>
+ ((pipe - 1) * 9)) :
+ I915_LPE_PIPE_A_INTERRUPT);
Either parametrize the I915_LPE_PIPE_INTERRUPT macro, or just have eg. a
switch here.
ok
But the bigger issue here is the mess with selecting the right bit. I
assume it should either depend on the pipe or port. I can't figure out
what is going on here.
And actually I don't understand why we even need this function. The
irqchip should take care to unmask all the interrupts when the audio
device does its request_irq.
agree, it's not clear to me either. I'll work with Jerome to figure out
if/how this can be removed.
@@ -3364,6 +3425,14 @@ static void vlv_display_irq_postinstall(struct
drm_i915_private *dev_priv)
WARN_ON(dev_priv->irq_mask != ~0);
+ if (IS_LPE_AUDIO_ENABLED(dev_priv)) {
+ u32 val = (I915_LPE_PIPE_A_INTERRUPT |
+ I915_LPE_PIPE_B_INTERRUPT |
+ I915_LPE_PIPE_C_INTERRUPT);
'val' seems like a rather pointless local variable.
+
+ enable_mask |= val;
indeed, will fix.
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
