Rename accessor_flags to flags, so that we can use the field for
other flags too. This is a preparation patch for adding cherrytrail
support to the punit semaphore code.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nik...@linux.intel.com>
Tested-by: Takashi Iwai <ti...@suse.de>
Acked-by: Wolfram Sang <w...@the-dreams.de>
---
drivers/i2c/busses/i2c-designware-core.c | 14 +++++++-------
drivers/i2c/busses/i2c-designware-core.h | 2 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 2 +-
3 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.c
b/drivers/i2c/busses/i2c-designware-core.c
index 6d81c56..8c3ba42 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -177,13 +177,13 @@ static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
{
u32 value;
- if (dev->accessor_flags & ACCESS_16BIT)
+ if (dev->flags & ACCESS_16BIT)
value = readw_relaxed(dev->base + offset) |
(readw_relaxed(dev->base + offset + 2) << 16);
else
value = readl_relaxed(dev->base + offset);
- if (dev->accessor_flags & ACCESS_SWAP)
+ if (dev->flags & ACCESS_SWAP)
return swab32(value);
else
return value;
@@ -191,10 +191,10 @@ static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
{
- if (dev->accessor_flags & ACCESS_SWAP)
+ if (dev->flags & ACCESS_SWAP)
b = swab32(b);
- if (dev->accessor_flags & ACCESS_16BIT) {
+ if (dev->flags & ACCESS_16BIT) {
writew_relaxed((u16)b, dev->base + offset);
writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
} else {
@@ -339,10 +339,10 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
/* Configure register endianess access */
- dev->accessor_flags |= ACCESS_SWAP;
+ dev->flags |= ACCESS_SWAP;
} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
/* Configure register access mode 16bit */
- dev->accessor_flags |= ACCESS_16BIT;
+ dev->flags |= ACCESS_16BIT;
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
@@ -926,7 +926,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
tx_aborted:
if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
- else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
+ else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
/* workaround to trigger pending interrupt */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.h
b/drivers/i2c/busses/i2c-designware-core.h
index 26250b4..2c50571 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -103,7 +103,7 @@ struct dw_i2c_dev {
unsigned int status;
u32 abort_source;
int irq;
- u32 accessor_flags;
+ u32 flags;
struct i2c_adapter adapter;
u32 functionality;
u32 master_cfg;
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c
b/drivers/i2c/busses/i2c-designware-platdrv.c
index 6ce4313..3eede7b 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -112,7 +112,7 @@ static int dw_i2c_acpi_configure(struct platform_device
*pdev)
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id && id->driver_data)
- dev->accessor_flags |= (u32)id->driver_data;
+ dev->flags |= (u32)id->driver_data;
return 0;
}
--
2.9.3
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
