On Thu, 2017-02-16 at 11:05 +0200, Imre Deak wrote:
> On Fri, Feb 10, 2017 at 03:29:54PM +0200, Ander Conselvan de Oliveira wrote:
> > The aux power domain only makes sense in the DP code. Storing it in
> > struct intel_dp avoids some indirection.
> > 
> > v2: Rebase
> > Signed-off-by: Ander Conselvan de Oliveira 
> > <ander.conselvan.de.olive...@intel.com>
> > ---
> >  drivers/gpu/drm/i915/intel_display.c | 50 -----------------------------
> >  drivers/gpu/drm/i915/intel_dp.c      | 61 
> > ++++++++++++++----------------------
> >  drivers/gpu/drm/i915/intel_drv.h     |  3 +-
> >  3 files changed, 24 insertions(+), 90 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/intel_display.c 
> > b/drivers/gpu/drm/i915/intel_display.c
> > index ab78df9..1e70776 100644
> > --- a/drivers/gpu/drm/i915/intel_display.c
> > +++ b/drivers/gpu/drm/i915/intel_display.c
> > @@ -5589,26 +5589,6 @@ static enum intel_display_power_domain 
> > port_to_power_domain(enum port port)
> >     }
> >  }
> >  
> > -static enum intel_display_power_domain port_to_aux_power_domain(enum port 
> > port)
> > -{
> > -   switch (port) {
> > -   case PORT_A:
> > -           return POWER_DOMAIN_AUX_A;
> > -   case PORT_B:
> > -           return POWER_DOMAIN_AUX_B;
> > -   case PORT_C:
> > -           return POWER_DOMAIN_AUX_C;
> > -   case PORT_D:
> > -           return POWER_DOMAIN_AUX_D;
> > -   case PORT_E:
> > -           /* FIXME: Check VBT for actual wiring of PORT E */
> > -           return POWER_DOMAIN_AUX_D;
> > -   default:
> > -           MISSING_CASE(port);
> > -           return POWER_DOMAIN_AUX_A;
> > -   }
> > -}
> > -
> >  enum intel_display_power_domain
> >  intel_display_port_power_domain(struct intel_encoder *intel_encoder)
> >  {
> > @@ -5636,36 +5616,6 @@ intel_display_port_power_domain(struct intel_encoder 
> > *intel_encoder)
> >     }
> >  }
> >  
> > -enum intel_display_power_domain
> > -intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder)
> > -{
> > -   struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> > -   struct intel_digital_port *intel_dig_port;
> > -
> > -   switch (intel_encoder->type) {
> > -   case INTEL_OUTPUT_UNKNOWN:
> > -   case INTEL_OUTPUT_HDMI:
> > -           /*
> > -            * Only DDI platforms should ever use these output types.
> > -            * We can get here after the HDMI detect code has already set
> > -            * the type of the shared encoder. Since we can't be sure
> > -            * what's the status of the given connectors, play safe and
> > -            * run the DP detection too.
> > -            */
> > -           WARN_ON_ONCE(!HAS_DDI(dev_priv));
> > -   case INTEL_OUTPUT_DP:
> > -   case INTEL_OUTPUT_EDP:
> > -           intel_dig_port = enc_to_dig_port(&intel_encoder->base);
> > -           return port_to_aux_power_domain(intel_dig_port->port);
> > -   case INTEL_OUTPUT_DP_MST:
> > -           intel_dig_port = enc_to_mst(&intel_encoder->base)->primary;
> > -           return port_to_aux_power_domain(intel_dig_port->port);
> 
> I was wondering where the dp->aux_power_domain gets inited for the MST case,
> but looks like this case could never happen even now. The patch looks ok:

Looks like I forgot to Cc Jani, but he had the same concern: https://lists.freed
esktop.org/archives/intel-gfx/2017-February/119027.html

The important part is that when the MST connector is initialized, it receives a
struct intel_dp as a parameter, and that struct has the aux power domain
initialized. That is what ends up in the ->primary field which the function
above uses.

> Reviewed-by: Imre Deak <imre.d...@intel.com>

Thanks,
Ander

> 
> > -   default:
> > -           MISSING_CASE(intel_encoder->type);
> > -           return POWER_DOMAIN_AUX_A;
> > -   }
> > -}
> > -
> >  static u64 get_crtc_power_domains(struct drm_crtc *crtc,
> >                               struct intel_crtc_state *crtc_state)
> >  {
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c 
> > b/drivers/gpu/drm/i915/intel_dp.c
> > index fa77e96..e2e4766 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -396,14 +396,12 @@ static void pps_lock(struct intel_dp *intel_dp)
> >     struct intel_encoder *encoder = &intel_dig_port->base;
> >     struct drm_device *dev = encoder->base.dev;
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> > -   enum intel_display_power_domain power_domain;
> >  
> >     /*
> >      * See vlv_power_sequencer_reset() why we need
> >      * a power domain reference here.
> >      */
> > -   power_domain = intel_display_port_aux_power_domain(encoder);
> > -   intel_display_power_get(dev_priv, power_domain);
> > +   intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >  
> >     mutex_lock(&dev_priv->pps_mutex);
> >  }
> > @@ -414,12 +412,10 @@ static void pps_unlock(struct intel_dp *intel_dp)
> >     struct intel_encoder *encoder = &intel_dig_port->base;
> >     struct drm_device *dev = encoder->base.dev;
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> > -   enum intel_display_power_domain power_domain;
> >  
> >     mutex_unlock(&dev_priv->pps_mutex);
> >  
> > -   power_domain = intel_display_port_aux_power_domain(encoder);
> > -   intel_display_power_put(dev_priv, power_domain);
> > +   intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >  }
> >  
> >  static void
> > @@ -2005,9 +2001,7 @@ static bool edp_panel_vdd_on(struct intel_dp 
> > *intel_dp)
> >  {
> >     struct drm_device *dev = intel_dp_to_dev(intel_dp);
> >     struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > -   struct intel_encoder *intel_encoder = &intel_dig_port->base;
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> > -   enum intel_display_power_domain power_domain;
> >     u32 pp;
> >     i915_reg_t pp_stat_reg, pp_ctrl_reg;
> >     bool need_to_disable = !intel_dp->want_panel_vdd;
> > @@ -2023,8 +2017,7 @@ static bool edp_panel_vdd_on(struct intel_dp 
> > *intel_dp)
> >     if (edp_have_panel_vdd(intel_dp))
> >             return need_to_disable;
> >  
> > -   power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > -   intel_display_power_get(dev_priv, power_domain);
> > +   intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >  
> >     DRM_DEBUG_KMS("Turning eDP port %c VDD on\n",
> >                   port_name(intel_dig_port->port));
> > @@ -2082,8 +2075,6 @@ static void edp_panel_vdd_off_sync(struct intel_dp 
> > *intel_dp)
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> >     struct intel_digital_port *intel_dig_port =
> >             dp_to_dig_port(intel_dp);
> > -   struct intel_encoder *intel_encoder = &intel_dig_port->base;
> > -   enum intel_display_power_domain power_domain;
> >     u32 pp;
> >     i915_reg_t pp_stat_reg, pp_ctrl_reg;
> >  
> > @@ -2113,8 +2104,7 @@ static void edp_panel_vdd_off_sync(struct intel_dp 
> > *intel_dp)
> >     if ((pp & PANEL_POWER_ON) == 0)
> >             intel_dp->panel_power_off_time = ktime_get_boottime();
> >  
> > -   power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > -   intel_display_power_put(dev_priv, power_domain);
> > +   intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >  }
> >  
> >  static void edp_panel_vdd_work(struct work_struct *__work)
> > @@ -2227,11 +2217,8 @@ void intel_edp_panel_on(struct intel_dp *intel_dp)
> >  
> >  static void edp_panel_off(struct intel_dp *intel_dp)
> >  {
> > -   struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> > -   struct intel_encoder *intel_encoder = &intel_dig_port->base;
> >     struct drm_device *dev = intel_dp_to_dev(intel_dp);
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> > -   enum intel_display_power_domain power_domain;
> >     u32 pp;
> >     i915_reg_t pp_ctrl_reg;
> >  
> > @@ -2263,8 +2250,7 @@ static void edp_panel_off(struct intel_dp *intel_dp)
> >     wait_panel_off(intel_dp);
> >  
> >     /* We got a reference when we enabled the VDD. */
> > -   power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > -   intel_display_power_put(dev_priv, power_domain);
> > +   intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >  }
> >  
> >  void intel_edp_panel_off(struct intel_dp *intel_dp)
> > @@ -4587,11 +4573,9 @@ intel_dp_long_pulse(struct intel_connector 
> > *intel_connector)
> >     struct intel_encoder *intel_encoder = &intel_dig_port->base;
> >     struct drm_device *dev = connector->dev;
> >     enum drm_connector_status status;
> > -   enum intel_display_power_domain power_domain;
> >     u8 sink_irq_vector = 0;
> >  
> > -   power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > -   intel_display_power_get(to_i915(dev), power_domain);
> > +   intel_display_power_get(to_i915(dev), intel_dp->aux_power_domain);
> >  
> >     /* Can't disconnect eDP, but you can close the lid... */
> >     if (is_edp(intel_dp))
> > @@ -4688,7 +4672,7 @@ intel_dp_long_pulse(struct intel_connector 
> > *intel_connector)
> >     if (status != connector_status_connected && !intel_dp->is_mst)
> >             intel_dp_unset_edid(intel_dp);
> >  
> > -   intel_display_power_put(to_i915(dev), power_domain);
> > +   intel_display_power_put(to_i915(dev), intel_dp->aux_power_domain);
> >     return status;
> >  }
> >  
> > @@ -4716,7 +4700,6 @@ intel_dp_force(struct drm_connector *connector)
> >     struct intel_dp *intel_dp = intel_attached_dp(connector);
> >     struct intel_encoder *intel_encoder = &dp_to_dig_port(intel_dp)->base;
> >     struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev);
> > -   enum intel_display_power_domain power_domain;
> >  
> >     DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> >                   connector->base.id, connector->name);
> > @@ -4725,12 +4708,11 @@ intel_dp_force(struct drm_connector *connector)
> >     if (connector->status != connector_status_connected)
> >             return;
> >  
> > -   power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > -   intel_display_power_get(dev_priv, power_domain);
> > +   intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >  
> >     intel_dp_set_edid(intel_dp);
> >  
> > -   intel_display_power_put(dev_priv, power_domain);
> > +   intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >  
> >     if (intel_encoder->type != INTEL_OUTPUT_EDP)
> >             intel_encoder->type = INTEL_OUTPUT_DP;
> > @@ -4965,7 +4947,6 @@ static void intel_edp_panel_vdd_sanitize(struct 
> > intel_dp *intel_dp)
> >     struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> >     struct drm_device *dev = intel_dig_port->base.base.dev;
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> > -   enum intel_display_power_domain power_domain;
> >  
> >     lockdep_assert_held(&dev_priv->pps_mutex);
> >  
> > @@ -4979,8 +4960,7 @@ static void intel_edp_panel_vdd_sanitize(struct 
> > intel_dp *intel_dp)
> >      * indefinitely.
> >      */
> >     DRM_DEBUG_KMS("VDD left on by BIOS, adjusting state tracking\n");
> > -   power_domain = 
> > intel_display_port_aux_power_domain(&intel_dig_port->base);
> > -   intel_display_power_get(dev_priv, power_domain);
> > +   intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >  
> >     edp_panel_vdd_schedule_off(intel_dp);
> >  }
> > @@ -5052,10 +5032,8 @@ enum irqreturn
> >  intel_dp_hpd_pulse(struct intel_digital_port *intel_dig_port, bool 
> > long_hpd)
> >  {
> >     struct intel_dp *intel_dp = &intel_dig_port->dp;
> > -   struct intel_encoder *intel_encoder = &intel_dig_port->base;
> >     struct drm_device *dev = intel_dig_port->base.base.dev;
> >     struct drm_i915_private *dev_priv = to_i915(dev);
> > -   enum intel_display_power_domain power_domain;
> >     enum irqreturn ret = IRQ_NONE;
> >  
> >     if (intel_dig_port->base.type != INTEL_OUTPUT_EDP &&
> > @@ -5083,8 +5061,7 @@ intel_dp_hpd_pulse(struct intel_digital_port 
> > *intel_dig_port, bool long_hpd)
> >             return IRQ_NONE;
> >     }
> >  
> > -   power_domain = intel_display_port_aux_power_domain(intel_encoder);
> > -   intel_display_power_get(dev_priv, power_domain);
> > +   intel_display_power_get(dev_priv, intel_dp->aux_power_domain);
> >  
> >     if (intel_dp->is_mst) {
> >             if (intel_dp_check_mst_status(intel_dp) == -EINVAL) {
> > @@ -5112,7 +5089,7 @@ intel_dp_hpd_pulse(struct intel_digital_port 
> > *intel_dig_port, bool long_hpd)
> >     ret = IRQ_HANDLED;
> >  
> >  put_power:
> > -   intel_display_power_put(dev_priv, power_domain);
> > +   intel_display_power_put(dev_priv, intel_dp->aux_power_domain);
> >  
> >     return ret;
> >  }
> > @@ -5903,27 +5880,35 @@ static bool intel_edp_init_connector(struct 
> > intel_dp *intel_dp,
> >     return false;
> >  }
> >  
> > +/* Set up the hotplug pin and aux power domain. */
> >  static void
> >  intel_dp_init_connector_port_info(struct intel_digital_port 
> > *intel_dig_port)
> >  {
> >     struct intel_encoder *encoder = &intel_dig_port->base;
> > +   struct intel_dp *intel_dp = &intel_dig_port->dp;
> >  
> > -   /* Set up the hotplug pin. */
> >     switch (intel_dig_port->port) {
> >     case PORT_A:
> >             encoder->hpd_pin = HPD_PORT_A;
> > +           intel_dp->aux_power_domain = POWER_DOMAIN_AUX_A;
> >             break;
> >     case PORT_B:
> >             encoder->hpd_pin = HPD_PORT_B;
> > +           intel_dp->aux_power_domain = POWER_DOMAIN_AUX_B;
> >             break;
> >     case PORT_C:
> >             encoder->hpd_pin = HPD_PORT_C;
> > +           intel_dp->aux_power_domain = POWER_DOMAIN_AUX_C;
> >             break;
> >     case PORT_D:
> >             encoder->hpd_pin = HPD_PORT_D;
> > +           intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
> >             break;
> >     case PORT_E:
> >             encoder->hpd_pin = HPD_PORT_E;
> > +
> > +           /* FIXME: Check VBT for actual wiring of PORT E */
> > +           intel_dp->aux_power_domain = POWER_DOMAIN_AUX_D;
> >             break;
> >     default:
> >             MISSING_CASE(intel_dig_port->port);
> > @@ -6003,6 +5988,8 @@ intel_dp_init_connector(struct intel_digital_port 
> > *intel_dig_port,
> >     connector->interlace_allowed = true;
> >     connector->doublescan_allowed = 0;
> >  
> > +   intel_dp_init_connector_port_info(intel_dig_port);
> > +
> >     intel_dp_aux_init(intel_dp);
> >  
> >     INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
> > @@ -6015,8 +6002,6 @@ intel_dp_init_connector(struct intel_digital_port 
> > *intel_dig_port,
> >     else
> >             intel_connector->get_hw_state = intel_connector_get_hw_state;
> >  
> > -   intel_dp_init_connector_port_info(intel_dig_port);
> > -
> >     /* init MST on ports that can support it */
> >     if (HAS_DP_MST(dev_priv) && !is_edp(intel_dp) &&
> >         (port == PORT_B || port == PORT_C || port == PORT_D))
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h 
> > b/drivers/gpu/drm/i915/intel_drv.h
> > index 6e37fba..3ddeaa6 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -950,6 +950,7 @@ struct intel_dp {
> >     /* sink or branch descriptor */
> >     struct intel_dp_desc desc;
> >     struct drm_dp_aux aux;
> > +   enum intel_display_power_domain aux_power_domain;
> >     uint8_t train_set[4];
> >     int panel_power_up_delay;
> >     int panel_power_down_delay;
> > @@ -1421,8 +1422,6 @@ void hsw_enable_ips(struct intel_crtc *crtc);
> >  void hsw_disable_ips(struct intel_crtc *crtc);
> >  enum intel_display_power_domain
> >  intel_display_port_power_domain(struct intel_encoder *intel_encoder);
> > -enum intel_display_power_domain
> > -intel_display_port_aux_power_domain(struct intel_encoder *intel_encoder);
> >  void intel_mode_from_pipe_config(struct drm_display_mode *mode,
> >                              struct intel_crtc_state *pipe_config);
> >  
> > -- 
> > 2.9.3
> > 
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to