On Tue, 2017-04-25 at 09:51 +0200, Maarten Lankhorst wrote:
> On 21-04-17 07:51, Dhinakaran Pandiyan wrote:
> > From: "Pandiyan, Dhinakaran" <dhinakaran.pandi...@intel.com>
> >
> > Use the added helpers to track MST link bandwidth for atomic modesets.
> > Link bw is acquired in the ->atomic_check() phase when CRTCs are being
> > enabled with drm_atomic_find_vcpi_slots() instead of drm_find_vcpi_slots().
> > Similarly, link bw is released during ->atomic_check() with the connector
> > helper callback ->atomic_release() when CRTCs are disabled.
> >
> > v5: Implement connector->atomic_check() in place of atomic_release()
> > v4: Return an int from intel_dp_mst_atomic_release() (Maarten)
> > v3:
> > Handled the case where ->atomic_release() is called more than once
> > during an atomic_check() for the same state.
> > v2:
> > Squashed atomic_release() implementation and caller (Daniel)
> > Fixed logic for connector-crtc switching case (Daniel)
> > Fixed logic for suspend-resume case.
> >
> > Cc: Daniel Vetter <daniel.vet...@ffwll.ch>
> > Cc: Maarten Lankhorst <maarten.lankho...@linux.intel.com>
> > Cc: Archit Taneja <arch...@codeaurora.org>
> > Cc: Chris Wilson <ch...@chris-wilson.co.uk>
> > Cc: Harry Wentland <harry.wentl...@amd.com>
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandi...@intel.com>
> > ---
> > drivers/gpu/drm/i915/intel_dp_mst.c | 57
> > +++++++++++++++++++++++++++++++++----
> > 1 file changed, 51 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c
> > b/drivers/gpu/drm/i915/intel_dp_mst.c
> > index 5af22a7..20c557c 100644
> > --- a/drivers/gpu/drm/i915/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/intel_dp_mst.c
> > @@ -39,9 +39,9 @@ static bool intel_dp_mst_compute_config(struct
> > intel_encoder *encoder,
> > struct intel_dp *intel_dp = &intel_dig_port->dp;
> > struct intel_connector *connector =
> > to_intel_connector(conn_state->connector);
> > - struct drm_atomic_state *state;
> > + struct drm_atomic_state *state = pipe_config->base.state;
> > int bpp;
> > - int lane_count, slots;
> > + int lane_count, slots = 0;
> > const struct drm_display_mode *adjusted_mode =
> > &pipe_config->base.adjusted_mode;
> > int mst_pbn;
> >
> > @@ -63,24 +63,68 @@ static bool intel_dp_mst_compute_config(struct
> > intel_encoder *encoder,
> > pipe_config->pipe_bpp = bpp;
> > pipe_config->port_clock = intel_dp_max_link_rate(intel_dp);
> >
> > - state = pipe_config->base.state;
> > -
> > if (drm_dp_mst_port_has_audio(&intel_dp->mst_mgr, connector->port))
> > pipe_config->has_audio = true;
> > - mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
> >
> > + mst_pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock, bpp);
> > pipe_config->pbn = mst_pbn;
> > - slots = drm_dp_find_vcpi_slots(&intel_dp->mst_mgr, mst_pbn);
> >
> > intel_link_compute_m_n(bpp, lane_count,
> > adjusted_mode->crtc_clock,
> > pipe_config->port_clock,
> > &pipe_config->dp_m_n);
> >
> > + if (pipe_config->base.active) {
> Is this check needed? If so it needs a comment as to why.
>
> I know that the output won't actually turn on, but if the crtc is configured
> vcpi slots should be allocated if possible.
>
> Else the following will fail in the wrong place:
> 1. Configure CRTC with a valid mode and DP-MST connector, but set
> active=false. connectors_changed = true, mode_changed = true. Not enough VCPI
> slots to enable all crtc's at the same time now, but this returns OK.
> 2. Commit with active property set to true. There are too few vcpi slots to
> make this work, this atomic commit returns -EINVAL. This might happen on a
> different crtc than the newly configured one in stap 1, if they were all
> previously set to !active.
>
Thanks for the review.
I am not sure if it's supposed to fail earlier i.e, when active=false,
connectors_changed = true, mode_changed = true.
In your example,
1. We have enough vcpi slots for crtc1 and crtc2- for both active=false
and enable=true.
2. Now, crtc3 is also configured with active=false and it does not have
enough bandwidth to be active along with crtc1 and crtc2.
3. You are saying the problem is that if there is a commit with crtc3,
crtc2, crtc1, in that order, setting active=true, then the commit will
fail?
I don't know how likely this scenario is, but what if userspace is not
going to set crtc1 and crtc2 active=true at all and we return -EINVAL in
Step2 for crtc3?
iiuc we disable pipes, drop payload allocations, disable shared_dpll
when active goes from true->false, even if enable is still true. For eg.
this happens when I 'xset dpms force standby' without these patches. If
we are dropping resources when active goes true->false with enable=true,
shouldn't we also acquire only when active changes from false->true ?
-DK
> > + slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
> > + connector->port, mst_pbn);
> > + if (slots < 0) {
> > + DRM_DEBUG_KMS("failed finding vcpi slots:%d\n", slots);
> > + return false;
> > + }
> > + }
> > pipe_config->dp_m_n.tu = slots;
> >
> > return true;
> > +}
> >
> > +static inline bool release_resources(struct drm_crtc_state *crtc_state)
> > +{
> > + return (crtc_state->connectors_changed ||
> > + crtc_state->mode_changed ||
> > + (crtc_state->active_changed && !crtc_state->active));
> > +}
> > +
> > +static int intel_dp_mst_atomic_check(struct drm_connector *connector,
> > + struct drm_connector_state *new_conn_state)
> > +{
> > + struct drm_atomic_state *state = new_conn_state->state;
> > + struct drm_connector_state *old_conn_state;
> > + struct drm_crtc *old_crtc;
> > + struct drm_crtc_state *crtc_state;
> > + int slots, ret = 0;
> > +
> > + old_conn_state = drm_atomic_get_old_connector_state(state, connector);
> > + old_crtc = old_conn_state->crtc;
> > + if (!old_crtc)
> > + return 0;
> > +
> > + crtc_state = drm_atomic_get_new_crtc_state(state, old_crtc);
> > + slots = to_intel_crtc_state(crtc_state)->dp_m_n.tu;
> > +
> > + if (release_resources(crtc_state) && slots > 0) {
> > + struct drm_dp_mst_topology_mgr *mgr;
> > + struct drm_encoder *old_encoder;
> > +
> > + old_encoder = old_conn_state->best_encoder;
> > + mgr = &enc_to_mst(old_encoder)->primary->dp.mst_mgr;
> > +
> > + ret = drm_dp_atomic_release_vcpi_slots(state, mgr, slots);
> > + if (ret)
> > + DRM_DEBUG_KMS("failed releasing %d vcpi slots:%d\n",
> > slots, ret);
> > + else
> > + to_intel_crtc_state(crtc_state)->dp_m_n.tu = 0;
> > + }
> > + return ret;
> > }
> >
> > static void intel_mst_disable_dp(struct intel_encoder *encoder,
> > @@ -378,6 +422,7 @@ static const struct drm_connector_helper_funcs
> > intel_dp_mst_connector_helper_fun
> > .mode_valid = intel_dp_mst_mode_valid,
> > .atomic_best_encoder = intel_mst_atomic_best_encoder,
> > .best_encoder = intel_mst_best_encoder,
> > + .atomic_check = intel_dp_mst_atomic_check,
> > };
> >
> > static void intel_dp_mst_encoder_destroy(struct drm_encoder *encoder)
>
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
