On Wed, Oct 11, 2017 at 07:04:52PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <[email protected]>
>
> The only relevant difference between i9xx_get_initial_plane_config() and
> ironlake_get_initial_plane_config() is the HSW/BDW TILEOFF handling.
> Add that to i9xx_get_initial_plane_config() and nuke
> ironlake_get_initial_plane_config().
>
> Signed-off-by: Ville Syrjälä <[email protected]>
I'm still kinda wanting some way to test this here with every modeset, but
still can't come up with something simple&neat.
> ---
> drivers/gpu/drm/i915/intel_display.c | 79
> +++---------------------------------
> 1 file changed, 6 insertions(+), 73 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c
> b/drivers/gpu/drm/i915/intel_display.c
> index 21160a06ab36..82be2342d1c6 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7490,7 +7490,10 @@ i9xx_get_initial_plane_config(struct intel_crtc *crtc,
> fourcc = i9xx_format_to_fourcc(pixel_format);
> fb->format = drm_format_info(fourcc);
>
> - if (INTEL_GEN(dev_priv) >= 4) {
> + if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
> + offset = I915_READ(DSPOFFSET(plane_id));
> + base = I915_READ(DSPSURF(plane_id)) & 0xfffff000;
> + } else if (INTEL_GEN(dev_priv) >= 4) {
> if (plane_config->tiling)
> offset = I915_READ(DSPTILEOFF(plane_id));
> else
> @@ -8592,76 +8595,6 @@ static void ironlake_get_pfit_config(struct intel_crtc
> *crtc,
> }
> }
>
> -static void
> -ironlake_get_initial_plane_config(struct intel_crtc *crtc,
> - struct intel_initial_plane_config
> *plane_config)
> -{
> - struct drm_device *dev = crtc->base.dev;
> - struct drm_i915_private *dev_priv = to_i915(dev);
> - struct intel_plane *plane = to_intel_plane(crtc->base.primary);
> - enum old_plane_id plane_id = plane->plane;
> - enum pipe pipe = crtc->pipe;
> - u32 val, base, offset;
> - int fourcc, pixel_format;
> - unsigned int aligned_height;
> - struct drm_framebuffer *fb;
> - struct intel_framebuffer *intel_fb;
> -
> - val = I915_READ(DSPCNTR(plane_id));
> - if (!(val & DISPLAY_PLANE_ENABLE))
Hm, should we use plane->get_hw_state to take out this check? At least to
partially get close to the hw state readout approach we have for
crtc/encoders/connectors.
Aside form these two notes, patch itself looks good.
Reviewed-by: Daniel Vetter <[email protected]>
> - return;
> -
> - intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
> - if (!intel_fb) {
> - DRM_DEBUG_KMS("failed to alloc fb\n");
> - return;
> - }
> -
> - fb = &intel_fb->base;
> -
> - fb->dev = dev;
> -
> - if (INTEL_GEN(dev_priv) >= 4) {
> - if (val & DISPPLANE_TILED) {
> - plane_config->tiling = I915_TILING_X;
> - fb->modifier = I915_FORMAT_MOD_X_TILED;
> - }
> - }
> -
> - pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
> - fourcc = i9xx_format_to_fourcc(pixel_format);
> - fb->format = drm_format_info(fourcc);
> -
> - base = I915_READ(DSPSURF(plane_id)) & 0xfffff000;
> - if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
> - offset = I915_READ(DSPOFFSET(plane_id));
> - } else {
> - if (plane_config->tiling)
> - offset = I915_READ(DSPTILEOFF(plane_id));
> - else
> - offset = I915_READ(DSPLINOFF(plane_id));
> - }
> - plane_config->base = base;
> -
> - val = I915_READ(PIPESRC(pipe));
> - fb->width = ((val >> 16) & 0xfff) + 1;
> - fb->height = ((val >> 0) & 0xfff) + 1;
> -
> - val = I915_READ(DSPSTRIDE(plane_id));
> - fb->pitches[0] = val & 0xffffffc0;
> -
> - aligned_height = intel_fb_align_height(fb, 0, fb->height);
> -
> - plane_config->size = fb->pitches[0] * aligned_height;
> -
> - DRM_DEBUG_KMS("%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size
> 0x%x\n",
> - crtc->base.name, plane->base.name, fb->width, fb->height,
> - fb->format->cpp[0] * 8, base, fb->pitches[0],
> - plane_config->size);
> -
> - plane_config->fb = intel_fb;
> -}
> -
> static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config)
> {
> @@ -14140,7 +14073,7 @@ void intel_init_display_hooks(struct drm_i915_private
> *dev_priv)
> } else if (HAS_DDI(dev_priv)) {
> dev_priv->display.get_pipe_config = haswell_get_pipe_config;
> dev_priv->display.get_initial_plane_config =
> - ironlake_get_initial_plane_config;
> + i9xx_get_initial_plane_config;
> dev_priv->display.crtc_compute_clock =
> haswell_crtc_compute_clock;
> dev_priv->display.crtc_enable = haswell_crtc_enable;
> @@ -14148,7 +14081,7 @@ void intel_init_display_hooks(struct drm_i915_private
> *dev_priv)
> } else if (HAS_PCH_SPLIT(dev_priv)) {
> dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
> dev_priv->display.get_initial_plane_config =
> - ironlake_get_initial_plane_config;
> + i9xx_get_initial_plane_config;
> dev_priv->display.crtc_compute_clock =
> ironlake_crtc_compute_clock;
> dev_priv->display.crtc_enable = ironlake_crtc_enable;
> --
> 2.13.6
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
