We completely compute these anew in each modeset, hence we don't rely on them containing anything valid after resume.
To avoid breaking any ums setup due to reordering of the reads/writes simply don't reorder anything, but bracket the reads/writes into if (!kms) conditionals. More churn, but safer. v2: Fixup the logic, noticed by Paulo Zanoni. Signed-off-by: Daniel Vetter <[email protected]> --- drivers/gpu/drm/i915/i915_suspend.c | 68 ++++++++++++++++++++----------------- 1 file changed, 37 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 6e398a8..3d12147 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -660,21 +660,23 @@ static void i915_save_display(struct drm_device *dev) dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); } - /* Display Port state */ - if (SUPPORTS_INTEGRATED_DP(dev)) { - dev_priv->saveDP_B = I915_READ(DP_B); - dev_priv->saveDP_C = I915_READ(DP_C); - dev_priv->saveDP_D = I915_READ(DP_D); - dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(_PIPEA_GMCH_DATA_M); - dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(_PIPEB_GMCH_DATA_M); - dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(_PIPEA_GMCH_DATA_N); - dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(_PIPEB_GMCH_DATA_N); - dev_priv->savePIPEA_DP_LINK_M = I915_READ(_PIPEA_DP_LINK_M); - dev_priv->savePIPEB_DP_LINK_M = I915_READ(_PIPEB_DP_LINK_M); - dev_priv->savePIPEA_DP_LINK_N = I915_READ(_PIPEA_DP_LINK_N); - dev_priv->savePIPEB_DP_LINK_N = I915_READ(_PIPEB_DP_LINK_N); - } - /* FIXME: save TV & SDVO state */ + if (!drm_core_check_feature(dev, DRIVER_MODESET)) { + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + dev_priv->saveDP_B = I915_READ(DP_B); + dev_priv->saveDP_C = I915_READ(DP_C); + dev_priv->saveDP_D = I915_READ(DP_D); + dev_priv->savePIPEA_GMCH_DATA_M = I915_READ(_PIPEA_GMCH_DATA_M); + dev_priv->savePIPEB_GMCH_DATA_M = I915_READ(_PIPEB_GMCH_DATA_M); + dev_priv->savePIPEA_GMCH_DATA_N = I915_READ(_PIPEA_GMCH_DATA_N); + dev_priv->savePIPEB_GMCH_DATA_N = I915_READ(_PIPEB_GMCH_DATA_N); + dev_priv->savePIPEA_DP_LINK_M = I915_READ(_PIPEA_DP_LINK_M); + dev_priv->savePIPEB_DP_LINK_M = I915_READ(_PIPEB_DP_LINK_M); + dev_priv->savePIPEA_DP_LINK_N = I915_READ(_PIPEA_DP_LINK_N); + dev_priv->savePIPEB_DP_LINK_N = I915_READ(_PIPEB_DP_LINK_N); + } + /* FIXME: save TV & SDVO state */ + } /* Only save FBC state on the platform that supports FBC */ if (I915_HAS_FBC(dev)) { @@ -709,16 +711,18 @@ static void i915_restore_display(struct drm_device *dev) /* Display arbitration */ I915_WRITE(DSPARB, dev_priv->saveDSPARB); - /* Display port ratios (must be done before clock is set) */ - if (SUPPORTS_INTEGRATED_DP(dev)) { - I915_WRITE(_PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M); - I915_WRITE(_PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M); - I915_WRITE(_PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N); - I915_WRITE(_PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N); - I915_WRITE(_PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M); - I915_WRITE(_PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M); - I915_WRITE(_PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); - I915_WRITE(_PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); + if (!drm_core_check_feature(dev, DRIVER_MODESET)) { + /* Display port ratios (must be done before clock is set) */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(_PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M); + I915_WRITE(_PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M); + I915_WRITE(_PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N); + I915_WRITE(_PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N); + I915_WRITE(_PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M); + I915_WRITE(_PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M); + I915_WRITE(_PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N); + I915_WRITE(_PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N); + } } /* This is only meaningful in non-KMS mode */ @@ -761,13 +765,15 @@ static void i915_restore_display(struct drm_device *dev) I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); } - /* Display Port state */ - if (SUPPORTS_INTEGRATED_DP(dev)) { - I915_WRITE(DP_B, dev_priv->saveDP_B); - I915_WRITE(DP_C, dev_priv->saveDP_C); - I915_WRITE(DP_D, dev_priv->saveDP_D); + if (!drm_core_check_feature(dev, DRIVER_MODESET)) { + /* Display Port state */ + if (SUPPORTS_INTEGRATED_DP(dev)) { + I915_WRITE(DP_B, dev_priv->saveDP_B); + I915_WRITE(DP_C, dev_priv->saveDP_C); + I915_WRITE(DP_D, dev_priv->saveDP_D); + } + /* FIXME: restore TV & SDVO state */ } - /* FIXME: restore TV & SDVO state */ /* only restore FBC info on the platform that supports FBC*/ intel_disable_fbc(dev); -- 1.7.11.7 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
