Remove the kerneldoc markup applied to non-kerneldoc comments and
convert the multiline comments to the canonical style.
drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member
'connector' not described in 'intel_dvo_detect'
drivers/gpu/drm/i915/intel_dvo.c:303: warning: Function parameter or member
'force' not described in 'intel_dvo_detect'
drivers/gpu/drm/i915/intel_dvo.c:382: warning: Function parameter or member
'encoder' not described in 'intel_dvo_get_current_mode'
Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
---
drivers/gpu/drm/i915/intel_dvo.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index 59c066ca14e5..eb0c559b2715 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -245,7 +245,8 @@ static bool intel_dvo_compute_config(struct intel_encoder
*encoder,
intel_dvo->attached_connector->panel.fixed_mode;
struct drm_display_mode *adjusted_mode =
&pipe_config->base.adjusted_mode;
- /* If we have timings from the BIOS for the panel, put them in
+ /*
+ * If we have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
* with the panel scaling set up to source from the H/VDisplay
* of the original mode.
@@ -293,11 +294,6 @@ static void intel_dvo_pre_enable(struct intel_encoder
*encoder,
I915_WRITE(dvo_reg, dvo_val);
}
-/**
- * Detect the output connection on our DVO device.
- *
- * Unimplemented.
- */
static enum drm_connector_status
intel_dvo_detect(struct drm_connector *connector, bool force)
{
@@ -313,7 +309,8 @@ static int intel_dvo_get_modes(struct drm_connector
*connector)
const struct drm_display_mode *fixed_mode =
to_intel_connector(connector)->panel.fixed_mode;
- /* We should probably have an i2c driver get_modes function for those
+ /*
+ * We should probably have an i2c driver get_modes function for those
* devices which will have a fixed set of modes determined by the chip
* (TV-out, for example), but for now with just TMDS and LVDS,
* that's not the case.
@@ -371,7 +368,7 @@ static const struct drm_encoder_funcs intel_dvo_enc_funcs =
{
.destroy = intel_dvo_enc_destroy,
};
-/**
+/*
* Attempts to get a fixed panel timing for LVDS (currently only the i830).
*
* Other chips with DVO LVDS will need to extend this to deal with the LVDS
@@ -443,7 +440,8 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
uint32_t dpll[I915_MAX_PIPES];
enum port port;
- /* Allow the I2C driver info to specify the GPIO to be used in
+ /*
+ * Allow the I2C driver info to specify the GPIO to be used in
* special cases, but otherwise default to what's defined
* in the spec.
*/
@@ -454,7 +452,8 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
else
gpio = GMBUS_PIN_DPB;
- /* Set up the I2C bus necessary for the chip we're probing.
+ /*
+ * Set up the I2C bus necessary for the chip we're probing.
* It appears that everything is on GPIOE except for panels
* on i830 laptops, which are on GPIOB (DVOA).
*/
@@ -462,12 +461,14 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
intel_dvo->dev = *dvo;
- /* GMBUS NAK handling seems to be unstable, hence let the
+ /*
+ * GMBUS NAK handling seems to be unstable, hence let the
* transmitter detection run in bit banging mode for now.
*/
intel_gmbus_force_bit(i2c, true);
- /* ns2501 requires the DVO 2x clock before it will
+ /*
+ * ns2501 requires the DVO 2x clock before it will
* respond to i2c accesses, so make sure we have
* have the clock enabled before we attempt to
* initialize the device.
@@ -525,7 +526,8 @@ void intel_dvo_init(struct drm_i915_private *dev_priv)
intel_connector_attach_encoder(intel_connector, intel_encoder);
if (dvo->type == INTEL_DVO_CHIP_LVDS) {
- /* For our LVDS chipsets, we should hopefully be able
+ /*
+ * For our LVDS chipsets, we should hopefully be able
* to dig the fixed panel mode out of the BIOS data.
* However, it's in a different format from the BIOS
* data on chipsets with integrated LVDS (stored in AIM
--
2.16.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
