From: Chris Wilson <ch...@chris-wilson.co.uk>

Currently, we cancel the extra wakeref we have for !runtime-pm devices
inside power_wells_fini_hw. However, this is not strictly paired with
the acquisition of that wakeref in runtime_pm_enable (as the fini_hw may
be called on errors paths before we even call runtime_pm_enable). Make
the symmetry more explicit and include a check that we do release all of
our rpm wakerefs.

v2: Fixup transfer of ownership back to core whilst keeping our wakeref
count balanced.

Signed-off-by: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Imre Deak <imre.d...@intel.com>
Reviewed-by: Imre Deak <imre.d...@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.c         | 27 ++++++++-------------
 drivers/gpu/drm/i915/intel_drv.h        |  1 +
 drivers/gpu/drm/i915/intel_runtime_pm.c | 43 ++++++++++++++++++++++-----------
 3 files changed, 40 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 41111f2a9c39..021304e252eb 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1281,6 +1281,8 @@ static void i915_driver_register(struct drm_i915_private 
*dev_priv)
         */
        if (INTEL_INFO(dev_priv)->num_pipes)
                drm_kms_helper_poll_init(dev);
+
+       intel_runtime_pm_enable(dev_priv);
 }
 
 /**
@@ -1289,6 +1291,8 @@ static void i915_driver_register(struct drm_i915_private 
*dev_priv)
  */
 static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 {
+       intel_runtime_pm_disable(dev_priv);
+
        intel_fbdev_unregister(dev_priv);
        intel_audio_deinit(dev_priv);
 
@@ -1366,16 +1370,6 @@ int i915_driver_load(struct pci_dev *pdev, const struct 
pci_device_id *ent)
                goto out_fini;
 
        pci_set_drvdata(pdev, &dev_priv->drm);
-       /*
-        * Disable the system suspend direct complete optimization, which can
-        * leave the device suspended skipping the driver's suspend handlers
-        * if the device was already runtime suspended. This is needed due to
-        * the difference in our runtime and system suspend sequence and
-        * becaue the HDA driver may require us to enable the audio power
-        * domain during system suspend.
-        */
-       dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
-
        ret = i915_driver_init_early(dev_priv, ent);
        if (ret < 0)
                goto out_pci_disable;
@@ -1408,8 +1402,6 @@ int i915_driver_load(struct pci_dev *pdev, const struct 
pci_device_id *ent)
 
        i915_driver_register(dev_priv);
 
-       intel_runtime_pm_enable(dev_priv);
-
        intel_init_ipc(dev_priv);
 
        intel_runtime_pm_put(dev_priv);
@@ -1441,13 +1433,13 @@ void i915_driver_unload(struct drm_device *dev)
        struct drm_i915_private *dev_priv = to_i915(dev);
        struct pci_dev *pdev = dev_priv->drm.pdev;
 
-       i915_driver_unregister(dev_priv);
-
-       if (i915_gem_suspend(dev_priv))
-               DRM_ERROR("failed to idle hardware; continuing to unload!\n");
-
        intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
 
+       i915_driver_unregister(dev_priv);
+
+       if (i915_gem_suspend(dev_priv))
+               DRM_ERROR("failed to idle hardware; continuing to unload!\n");
+
        drm_atomic_helper_shutdown(dev);
 
        intel_gvt_cleanup(dev_priv);
@@ -1474,6 +1466,7 @@ void i915_driver_unload(struct drm_device *dev)
        i915_driver_cleanup_mmio(dev_priv);
 
        intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
+       WARN_ON(atomic_read(&dev_priv->runtime_pm.wakeref_count));
 }
 
 static void i915_driver_release(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7b984aefce98..3f012716f2dc 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1959,6 +1959,7 @@ void intel_power_domains_verify_state(struct 
drm_i915_private *dev_priv);
 void bxt_display_core_init(struct drm_i915_private *dev_priv, bool resume);
 void bxt_display_core_uninit(struct drm_i915_private *dev_priv);
 void intel_runtime_pm_enable(struct drm_i915_private *dev_priv);
+void intel_runtime_pm_disable(struct drm_i915_private *dev_priv);
 const char *
 intel_display_power_domain_str(enum intel_display_power_domain domain);
 
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c 
b/drivers/gpu/drm/i915/intel_runtime_pm.c
index e209edbc561d..c0983f0e46ac 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -3793,29 +3793,19 @@ void intel_power_domains_init_hw(struct 
drm_i915_private *dev_priv, bool resume)
  */
 void intel_power_domains_fini_hw(struct drm_i915_private *dev_priv)
 {
-       struct device *kdev = &dev_priv->drm.pdev->dev;
-
        /*
         * The i915.ko module is still not prepared to be loaded when
         * the power well is not enabled, so just enable it in case
         * we're going to unload/reload.
-        * The following also reacquires the RPM reference the core passed
-        * to the driver during loading, which is dropped in
-        * intel_runtime_pm_enable(). We have to hand back the control of the
-        * device to the core with this reference held.
         */
-       intel_display_set_init_power(dev_priv, true);
+       intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
+
+       /* Keep the power well enabled, but cancel its rpm wakeref. */
+       intel_runtime_pm_put(dev_priv);
 
        /* Remove the refcount we took to keep power well support disabled. */
        if (!i915_modparams.disable_power_well)
                intel_display_power_put(dev_priv, POWER_DOMAIN_INIT);
-
-       /*
-        * Remove the refcount we took in intel_runtime_pm_enable() in case
-        * the platform doesn't support runtime PM.
-        */
-       if (!HAS_RUNTIME_PM(dev_priv))
-               pm_runtime_put(kdev);
 }
 
 /**
@@ -4048,6 +4038,16 @@ void intel_runtime_pm_enable(struct drm_i915_private 
*dev_priv)
        struct pci_dev *pdev = dev_priv->drm.pdev;
        struct device *kdev = &pdev->dev;
 
+       /*
+        * Disable the system suspend direct complete optimization, which can
+        * leave the device suspended skipping the driver's suspend handlers
+        * if the device was already runtime suspended. This is needed due to
+        * the difference in our runtime and system suspend sequence and
+        * becaue the HDA driver may require us to enable the audio power
+        * domain during system suspend.
+        */
+       dev_pm_set_driver_flags(kdev, DPM_FLAG_NEVER_SKIP);
+
        pm_runtime_set_autosuspend_delay(kdev, 10000); /* 10s */
        pm_runtime_mark_last_busy(kdev);
 
@@ -4074,3 +4074,18 @@ void intel_runtime_pm_enable(struct drm_i915_private 
*dev_priv)
         */
        pm_runtime_put_autosuspend(kdev);
 }
+
+void intel_runtime_pm_disable(struct drm_i915_private *dev_priv)
+{
+       struct pci_dev *pdev = dev_priv->drm.pdev;
+       struct device *kdev = &pdev->dev;
+
+       /* Transfer rpm ownership back to core */
+       WARN(pm_runtime_get_sync(&dev_priv->drm.pdev->dev) < 0,
+            "Failed to pass rpm ownership back to core\n");
+
+       pm_runtime_dont_use_autosuspend(kdev);
+
+       if (!HAS_RUNTIME_PM(dev_priv))
+               pm_runtime_put(kdev);
+}
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to