From: Clinton Taylor <clinton.a.tay...@intel.com>
v2: Fix commit msg to reflect why issue occurs(Jani)
Set GCP_COLOR_INDICATION only when we set 10/12 bit deep color.
Changing settings from 10/12 bit deep color to 8 bit(& vice versa)
doesn't work correctly using xrandr max bpc property. When we
connect a monitor which supports deep color, the highest deep color
setting is selected; which sets GCP_COLOR_INDICATION. When we change
the setting to 8 bit color, we still set GCP_COLOR_INDICATION which
doesn't allow the switch back to 8 bit color.
v3,4: Add comments & drop changes in intel_hdmi_compute_config(Ville)
Since HSW+, GCP_COLOR_INDICATION is not required for 8bpc.
Drop the changes in intel_hdmi_compute_config as desired_bpp
is needed to change values for pipe_bpp based on bw_constrained flag.
v5: Fix missing logical && in condition for setting GCP_COLOR_INDICATION.
v6: Fix comment formatting (Ville)
v7: Add reviewed by Ville
v8: Set GCP_COLOR_INDICATION based on spec:
For Gen 7.5 or later platforms, indicate color depth only for deep
color modes. Bspec: 8135,7751,50524
Pre DDI platforms, indicate color depth if deep color is supported
by sink. Bspec: 7854
Exception: CHERRYVIEW behaves like Pre DDI platforms.
Bspec: 15975
Check pipe_bpp is less than bpp * 3 in hdmi_deep_color_possible,
to not set 12 bit deep color for every modeset. This fixes the issue
where 12 bit color was selected even when user selected 10 bit.(Ville)
v9: Maintain a consistent behavior for all platforms and support
GCP_COLOR_INDICATION only when we are in deep color mode. Remove
hdmi_sink_is_deep_color() - no longer needed as checking pipe_bpp > 24
takes care of the deep color mode scenario.
Separate patch for fixing switch from 12 bit to 10 bit deep color
mode.
Co-developed-by: Aditya Swarup <aditya.swa...@intel.com>
Signed-off-by: Clinton Taylor <clinton.a.tay...@intel.com>
Signed-off-by: Aditya Swarup <aditya.swa...@intel.com>
Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
Cc: Jani Nikula <jani.nik...@intel.com>
Cc: Manasi Navare <manasi.d.nav...@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrj...@linux.intel.com>
---
drivers/gpu/drm/i915/intel_hdmi.c | 17 ++---------------
1 file changed, 2 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c
b/drivers/gpu/drm/i915/intel_hdmi.c
index e1005d7b75fd..991eb362ef4f 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -856,19 +856,6 @@ static void g4x_set_infoframes(struct intel_encoder
*encoder,
&crtc_state->infoframes.hdmi);
}
-static bool hdmi_sink_is_deep_color(const struct drm_connector_state
*conn_state)
-{
- struct drm_connector *connector = conn_state->connector;
-
- /*
- * HDMI cloning is only supported on g4x which doesn't
- * support deep color or GCP infoframes anyway so no
- * need to worry about multiple HDMI sinks here.
- */
-
- return connector->display_info.bpc > 8;
-}
-
/*
* Determine if default_phase=1 can be indicated in the GCP infoframe.
*
@@ -973,8 +960,8 @@ static void intel_hdmi_compute_gcp_infoframe(struct
intel_encoder *encoder,
crtc_state->infoframes.enable |=
intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GENERAL_CONTROL);
- /* Indicate color depth whenever the sink supports deep color */
- if (hdmi_sink_is_deep_color(conn_state))
+ /* Indicate color indication for deep color mode */
+ if (crtc_state->pipe_bpp > 24)
crtc_state->infoframes.gcp |= GCP_COLOR_INDICATION;
/* Enable default_phase whenever the display mode is suitably aligned */
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
