The CRC PWM controller has a clock-divider which divides the clock with
a value between 1-128. But as can seen from the PWM_DIV_CLK_xxx
defines, this range maps to a register value of 0-127.
So after calculating the clock-divider we must subtract 1 to get the
register value, unless the requested frequency was so high that the
calculation has already resulted in a (rounded) divider value of 0.
Note that before this fix, setting a period of PWM_MAX_PERIOD_NS which
corresponds to the max. divider value of 128 could have resulted in a
bug where the code would use 128 as divider-register value which would
have resulted in an actual divider value of 0 (and the enable bit being
set). A rounding error stopped this bug from actually happen. This
same rounding error means that after the subtraction of 1 it is impossible
to set the divider to 128. Also bump PWM_MAX_PERIOD_NS by 1 ns to allow
setting a divider of 128 (register-value 127).
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
Changes in v3:
- Introduce crc_pwm_calc_clk_div() here instead of later in the patch-set
to reduce the amount of churn in the patch-set a bit
---
drivers/pwm/pwm-crc.c | 17 ++++++++++++++---
1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c
index c056eb9b858c..44ec7d5b63e1 100644
--- a/drivers/pwm/pwm-crc.c
+++ b/drivers/pwm/pwm-crc.c
@@ -22,7 +22,7 @@
#define PWM_MAX_LEVEL 0xFF
#define PWM_BASE_CLK_MHZ 6 /* 6 MHz */
-#define PWM_MAX_PERIOD_NS 5461333 /* 183 Hz */
+#define PWM_MAX_PERIOD_NS 5461334 /* 183 Hz */
/**
* struct crystalcove_pwm - Crystal Cove PWM controller
@@ -39,6 +39,18 @@ static inline struct crystalcove_pwm *to_crc_pwm(struct
pwm_chip *pc)
return container_of(pc, struct crystalcove_pwm, chip);
}
+static int crc_pwm_calc_clk_div(int period_ns)
+{
+ int clk_div;
+
+ clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC);
+ /* clk_div 1 - 128, maps to register values 0-127 */
+ if (clk_div > 0)
+ clk_div--;
+
+ return clk_div;
+}
+
static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
{
struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
@@ -68,11 +80,10 @@ static int crc_pwm_config(struct pwm_chip *c, struct
pwm_device *pwm,
}
if (pwm_get_period(pwm) != period_ns) {
- int clk_div;
+ int clk_div = crc_pwm_calc_clk_div(period_ns);
/* changing the clk divisor, need to disable fisrt */
crc_pwm_disable(c, pwm);
- clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC);
regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
clk_div | PWM_OUTPUT_ENABLE);
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
