The Bspec:49291 is now changed to reflect that for all platforms the
DCC_MODE will be programmed to DCC_MODE_SELECT_ONCE,
rather than DCC_MODE_SELECT_CONTINUOUSLY.
I will send new patch for the same.
Regards,
Ankit
On 8/10/2022 8:26 PM, Ankit Nautiyal wrote:
Wa_22012718247 : When Display PHY is configured in continuous
DCC calibration mode, the DCC (duty cycle correction) for the clock
erroneously goes through a state where the DCC code is 0x00 when it is
supposed to be transitioning from 0x10 to 0x0F. This glitch causes a
distortion in the clock, which leads to a bit error. The issue is known
to be causing flickering with eDP HBR3 panels.
The work around configures the DCC in one-time-update mode.
This mode updates the DCC code one time during training and then
it does not change. This will prevent on-the-fly updates so that the
glitch does not occur.
v2: Added helper function for DCC_MODE (Imre).
Signed-off-by: Ankit Nautiyal <[email protected]>
---
drivers/gpu/drm/i915/display/intel_combo_phy.c | 16 ++++++++++++++--
.../gpu/drm/i915/display/intel_combo_phy_regs.h | 1 +
2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy.c
b/drivers/gpu/drm/i915/display/intel_combo_phy.c
index 64890f39c3cc..b3be0e3ca984 100644
--- a/drivers/gpu/drm/i915/display/intel_combo_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_combo_phy.c
@@ -226,6 +226,17 @@ static bool phy_is_master(struct drm_i915_private
*dev_priv, enum phy phy)
return false;
}
+static u32 tgl_dcc_calibration_mode(struct drm_i915_private *dev_priv)
+{
+ /* Wa_22012718247:tgl,adlp,adls */
+ if (IS_TIGERLAKE(dev_priv) ||
+ IS_ALDERLAKE_P(dev_priv) ||
+ IS_ALDERLAKE_S(dev_priv))
+ return DCC_MODE_SELECT_ONCE;
+
+ return DCC_MODE_SELECT_CONTINUOSLY;
+}
+
static bool icl_combo_phy_verify_state(struct drm_i915_private *dev_priv,
enum phy phy)
{
@@ -244,7 +255,7 @@ static bool icl_combo_phy_verify_state(struct
drm_i915_private *dev_priv,
ret &= check_phy_reg(dev_priv, phy, ICL_PORT_PCS_DW1_LN(0, phy),
DCC_MODE_SELECT_MASK,
- DCC_MODE_SELECT_CONTINUOSLY);
+ tgl_dcc_calibration_mode(dev_priv));
}
ret &= icl_verify_procmon_ref_values(dev_priv, phy);
@@ -366,8 +377,9 @@ static void icl_combo_phys_init(struct drm_i915_private
*dev_priv)
intel_de_write(dev_priv, ICL_PORT_TX_DW8_GRP(phy), val);
val = intel_de_read(dev_priv, ICL_PORT_PCS_DW1_LN(0, phy));
+
val &= ~DCC_MODE_SELECT_MASK;
- val |= DCC_MODE_SELECT_CONTINUOSLY;
+ val |= tgl_dcc_calibration_mode(dev_priv);
intel_de_write(dev_priv, ICL_PORT_PCS_DW1_GRP(phy),
val);
}
diff --git a/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h b/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h
index 2ed65193ca19..cf46f13401d1 100644
--- a/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_combo_phy_regs.h
@@ -92,6 +92,7 @@
#define ICL_PORT_PCS_DW1_LN(ln, phy) _MMIO(_ICL_PORT_PCS_DW_LN(1,
ln, phy))
#define DCC_MODE_SELECT_MASK (0x3 << 20)
#define DCC_MODE_SELECT_CONTINUOSLY (0x3 << 20)
+#define DCC_MODE_SELECT_ONCE (0x0 << 20)
#define COMMON_KEEPER_EN (1 << 26)
#define LATENCY_OPTIM_MASK (0x3 << 2)
#define LATENCY_OPTIM_VAL(x) ((x) << 2)
