On Tue, 07 Feb 2023, Suraj Kandpal <[email protected]> wrote:
> From: Swati Sharma <[email protected]>
>
> DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
> to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
> Also, new debugfs entry is created to enforce output format. This is
> required because of our driver policy. For ex. if a mode is supported
> in both RGB and YCbCr420 output formats by the sink, our policy is to
> try RGB first and fall back to YCbCr420, if mode cannot be shown
> using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
> we need a debugfs entry (force_dsc_output_format) to force this
> output format.
>
> Signed-off-by: Swati Sharma <[email protected]>
> ---
> .../drm/i915/display/intel_crtc_state_dump.c | 4 +-
> .../drm/i915/display/intel_crtc_state_dump.h | 2 +
> .../drm/i915/display/intel_display_debugfs.c | 77 +++++++++++++++++++
> .../drm/i915/display/intel_display_types.h | 1 +
> drivers/gpu/drm/i915/display/intel_dp.c | 11 +++
> 5 files changed, 93 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> index 2422d6ef5777..9913f22e0f79 100644
> --- a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> +++ b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> @@ -115,13 +115,13 @@ static void snprintf_output_types(char *buf, size_t len,
> WARN_ON_ONCE(output_types != 0);
> }
>
> -static const char * const output_format_str[] = {
> +const char * const output_format_str[] = {
Why?
> [INTEL_OUTPUT_FORMAT_RGB] = "RGB",
> [INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
> [INTEL_OUTPUT_FORMAT_YCBCR444] = "YCBCR4:4:4",
> };
>
> -static const char *output_formats(enum intel_output_format format)
> +const char *output_formats(enum intel_output_format format)
output_formats is too generic a name to be non-static.
> {
> if (format >= ARRAY_SIZE(output_format_str))
> return "invalid";
> diff --git a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> index 9399c35b7e5e..daf0a7cc0702 100644
> --- a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> +++ b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> @@ -8,9 +8,11 @@
>
> struct intel_crtc_state;
> struct intel_atomic_state;
> +enum intel_output_format;
>
> void intel_crtc_state_dump(const struct intel_crtc_state *crtc_state,
> struct intel_atomic_state *state,
> const char *context);
> +const char *output_formats(enum intel_output_format format);
And maybe the place for the function is not here at all if it's needed
in multiple places.
>
> #endif /* __INTEL_CRTC_STATE_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index 9e2fb8626c96..27b7d8dafe66 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -12,6 +12,7 @@
> #include "i915_irq.h"
> #include "i915_reg.h"
> #include "intel_de.h"
> +#include "intel_crtc_state_dump.h"
> #include "intel_display_debugfs.h"
> #include "intel_display_power.h"
> #include "intel_display_power_well.h"
> @@ -1770,6 +1771,13 @@ static int i915_dsc_fec_support_show(struct seq_file
> *m, void *data)
> str_yes_no(crtc_state->dsc.compression_enable));
> seq_printf(m, "DSC_Sink_Support: %s\n",
>
> str_yes_no(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));
> + seq_printf(m, "DSC_Output_Format_Sink_Support: RGB: %s
> YCBCR420: %s YCBCR444: %s\n",
> +
> str_yes_no(drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd,
> +
> DP_DSC_RGB)),
> +
> str_yes_no(drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd,
> +
> DP_DSC_YCbCr420_Native)),
> +
> str_yes_no(drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd,
> +
> DP_DSC_YCbCr444)));
> seq_printf(m, "Force_DSC_Enable: %s\n",
> str_yes_no(intel_dp->force_dsc_en));
> if (!intel_dp_is_edp(intel_dp))
> @@ -1895,6 +1903,72 @@ static const struct file_operations i915_dsc_bpc_fops
> = {
> .write = i915_dsc_bpc_write
> };
>
> +static int i915_dsc_output_format_show(struct seq_file *m, void *data)
> +{
> + struct drm_connector *connector = m->private;
> + struct drm_device *dev = connector->dev;
> + struct drm_crtc *crtc;
> + struct intel_crtc_state *crtc_state;
> + struct intel_encoder *encoder =
> intel_attached_encoder(to_intel_connector(connector));
> + int ret;
> +
> + if (!encoder)
> + return -ENODEV;
> +
> + ret =
> drm_modeset_lock_single_interruptible(&dev->mode_config.connection_mutex);
> + if (ret)
> + return ret;
> +
> + crtc = connector->state->crtc;
> + if (connector->status != connector_status_connected || !crtc) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + crtc_state = to_intel_crtc_state(crtc->state);
> + seq_printf(m, "DSC_Output_Format: %s\n",
> output_formats(crtc_state->output_format));
> +
> +out: drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +
> + return ret;
> +}
> +
> +static ssize_t i915_dsc_output_format_write(struct file *file,
> + const char __user *ubuf,
> + size_t len, loff_t *offp)
> +{
> + struct drm_connector *connector =
> + ((struct seq_file *)file->private_data)->private;
> + struct intel_encoder *encoder =
> intel_attached_encoder(to_intel_connector(connector));
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> + int dsc_output_format = 0;
> + int ret;
> +
> + ret = kstrtoint_from_user(ubuf, len, 0, &dsc_output_format);
> + if (ret < 0)
> + return ret;
> +
> + intel_dp->force_dsc_output_format = dsc_output_format;
> + *offp += len;
> +
> + return len;
> +}
> +
> +static int i915_dsc_output_format_open(struct inode *inode,
> + struct file *file)
> +{
> + return single_open(file, i915_dsc_output_format_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_dsc_output_format_fops = {
> + .owner = THIS_MODULE,
> + .open = i915_dsc_output_format_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> + .write = i915_dsc_output_format_write
> +};
> +
> /*
> * Returns the Current CRTC's bpc.
> * Example usage: cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc
> @@ -1966,6 +2040,9 @@ void intel_connector_debugfs_add(struct intel_connector
> *intel_connector)
>
> debugfs_create_file("i915_dsc_bpc", 0644, root,
> connector, &i915_dsc_bpc_fops);
> +
> + debugfs_create_file("i915_dsc_output_format", 0644, root,
> + connector, &i915_dsc_output_format_fops);
> }
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_DSI ||
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 9ccae7a46020..9f7951b49c42 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1743,6 +1743,7 @@ struct intel_dp {
>
> /* Display stream compression testing */
> bool force_dsc_en;
> + int force_dsc_output_format;
> int force_dsc_bpc;
>
> bool hobl_failed;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> b/drivers/gpu/drm/i915/display/intel_dp.c
> index 250d9cdd14b8..bd2d3d11e85b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -76,6 +76,7 @@
> #include "intel_tc.h"
> #include "intel_vdsc.h"
> #include "intel_vrr.h"
> +#include "intel_crtc_state_dump.h"
>
> /* DP DSC throughput values used for slice count calculations KPixels/s */
> #define DP_DSC_PEAK_PIXEL_RATE 2720000
> @@ -2063,6 +2064,16 @@ intel_dp_compute_output_format(struct intel_encoder
> *encoder,
> bool ycbcr_420_only;
> int ret;
>
> + if (intel_dp->force_dsc_output_format) {
> + crtc_state->output_format = intel_dp->force_dsc_output_format;
> + drm_dbg_kms(&i915->drm, "DSC output format forced to %s",
> + output_formats(crtc_state->output_format));
> +
> + ret = intel_dp_compute_link_config(encoder, crtc_state,
> conn_state,
> + respect_downstream_limits);
Please don't duplicate the call to
intel_dp_compute_output_format(). Force the output format and try to use
the regular path otherwise. With the above approach, testing with the
forced output format uses a different path than is used otherwise.
BR,
Jani.
> + return ret;
> + }
> +
> ycbcr_420_only = drm_mode_is_420_only(info, adjusted_mode);
>
> crtc_state->output_format = intel_dp_output_format(connector,
> ycbcr_420_only);
--
Jani Nikula, Intel Open Source Graphics Center
