> -----Original Message----- > From: Kandpal, Suraj <[email protected]> > Sent: Thursday, August 10, 2023 1:18 PM > To: [email protected] > Cc: Nautiyal, Ankit K <[email protected]>; [email protected]; > Murthy, Arun R <[email protected]>; Kandpal, Suraj > <[email protected]> > Subject: [PATCH 3/4] drm/i915/hdcp: Send the correct aux for DPMST HDCP > scenario > > Up until now we were sending the base aux stored in dig_port which is not > correct as this causes an issue when monitor is connected via a DPMST hub > causing it to be remote hence we end up seeing AUX failures so let's send the > remote aux in case of DPMST. > > Signed-off-by: Suraj Kandpal <[email protected]>
Reviewed-by: Arun R Murthy <[email protected]> Thanks and Regards, Arun R Murthy -------------------- > --- > drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > index 5304aa73b23f..2a37a43243a3 100644 > --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c > @@ -452,7 +452,10 @@ int intel_dp_hdcp2_write_msg(struct > intel_connector *connector, > > offset = hdcp2_msg_data->offset; > > - aux = &dig_port->dp.aux; > + if (intel_encoder_is_mst(connector->encoder)) > + aux = &connector->port->aux; > + else > + aux = &dig_port->dp.aux; > > /* No msg_id in DP HDCP2.2 msgs */ > bytes_to_write = size - 1; > @@ -518,7 +521,10 @@ int intel_dp_hdcp2_read_msg(struct > intel_connector *connector, > return -EINVAL; > offset = hdcp2_msg_data->offset; > > - aux = &dp->aux; > + if (intel_encoder_is_mst(connector->encoder)) > + aux = &connector->port->aux; > + else > + aux = &dp->aux; > > ret = intel_dp_hdcp2_wait_for_msg(i915, aux, hdcp, > hdcp2_msg_data); > if (ret < 0) > -- > 2.25.1
