On Mon, Oct 30, 2023 at 05:58:14PM +0200, Imre Deak wrote:
> After drm_connector_init() is called the connector is visible to the
> rest of the kernel via the drm_mode_config::connector_list. Make
> sure that the DSC AUX device and capabilities are setup by that time.
>
> Another race condition is adding the connector to the connector list
> before drm_connector_helper_add() sets the connector helper functions.
> That's an unrelated issue, for which the fix is for a follow-up. One
> solution would be adding the connector to the connector list only
> during its registration in drm_connector_register().
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovs...@intel.com>
>
> Cc: Stanislav Lisovskiy <stanislav.lisovs...@intel.com>
> Cc: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Fixes: 808b43fa7e56 ("drm/i915/dp_mst: Set connector DSC capabilities and
> decompression AUX")
> Signed-off-by: Imre Deak <imre.d...@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 7b4628f4f1240..851b312bd8449 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -1161,6 +1161,14 @@ static struct drm_connector
> *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
> intel_connector->port = port;
> drm_dp_mst_get_port_malloc(port);
>
> + /*
> + * TODO: set the AUX for the actual MST port decompressing the stream.
> + * At the moment the driver only supports enabling this globally in the
> + * first downstream MST branch, via intel_dp's (root port) AUX.
> + */
> + intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
> + intel_dp_mst_read_decompression_port_dsc_caps(intel_dp,
> intel_connector);
> +
> connector = &intel_connector->base;
> ret = drm_connector_init(dev, connector, &intel_dp_mst_connector_funcs,
> DRM_MODE_CONNECTOR_DisplayPort);
> @@ -1172,14 +1180,6 @@ static struct drm_connector
> *intel_dp_add_mst_connector(struct drm_dp_mst_topolo
>
> drm_connector_helper_add(connector,
> &intel_dp_mst_connector_helper_funcs);
>
> - /*
> - * TODO: set the AUX for the actual MST port decompressing the stream.
> - * At the moment the driver only supports enabling this globally in the
> - * first downstream MST branch, via intel_dp's (root port) AUX.
> - */
> - intel_connector->dp.dsc_decompression_aux = &intel_dp->aux;
> - intel_dp_mst_read_decompression_port_dsc_caps(intel_dp,
> intel_connector);
> -
> for_each_pipe(dev_priv, pipe) {
> struct drm_encoder *enc =
> &intel_dp->mst_encoders[pipe]->base.base;
> --
> 2.39.2
>
