From: Ville Syrjälä <[email protected]>

The display interrupts changed on BDW, so the current ILK-HSW specific
code in ilk_pipe_in_vblank_locked() doesn't work there. Add the required
bits for BDW, and while at it, change the existing code to use nicer
looking vblank status bit macros.

Also remove the now stale __raw_i915_read16() definition which was
left over from the failed gen2 ISR experiment.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73962
Signed-off-by: Ville Syrjälä <[email protected]>
---
 drivers/gpu/drm/i915/i915_irq.c | 30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index d4c952d..ec9b8a4 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -618,33 +618,25 @@ static u32 gm45_get_vblank_counter(struct drm_device 
*dev, int pipe)
 
 /* raw reads, only for fast reads of display block, no need for forcewake etc. 
*/
 #define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + 
(reg__))
-#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + 
(reg__))
 
 static bool ilk_pipe_in_vblank_locked(struct drm_device *dev, enum pipe pipe)
 {
        struct drm_i915_private *dev_priv = dev->dev_private;
        uint32_t status;
-
-       if (INTEL_INFO(dev)->gen < 7) {
-               status = pipe == PIPE_A ?
-                       DE_PIPEA_VBLANK :
-                       DE_PIPEB_VBLANK;
+       int reg;
+
+       if (INTEL_INFO(dev)->gen >= 8) {
+               status = GEN8_PIPE_VBLANK;
+               reg = GEN8_DE_PIPE_ISR(pipe);
+       } else if (INTEL_INFO(dev)->gen >= 7) {
+               status = DE_PIPE_VBLANK_IVB(pipe);
+               reg = DEISR;
        } else {
-               switch (pipe) {
-               default:
-               case PIPE_A:
-                       status = DE_PIPEA_VBLANK_IVB;
-                       break;
-               case PIPE_B:
-                       status = DE_PIPEB_VBLANK_IVB;
-                       break;
-               case PIPE_C:
-                       status = DE_PIPEC_VBLANK_IVB;
-                       break;
-               }
+               status = DE_PIPE_VBLANK(pipe);
+               reg = DEISR;
        }
 
-       return __raw_i915_read32(dev_priv, DEISR) & status;
+       return __raw_i915_read32(dev_priv, reg) & status;
 }
 
 static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
-- 
1.8.3.2

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to