Prefer generic poll helpers over i915 custom helpers. The functional change is losing the exponentially growing sleep of wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at 3 ms. Signed-off-by: Jani Nikula <jani.nik...@intel.com> --- drivers/gpu/drm/i915/display/i9xx_wm.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/display/i9xx_wm.c b/drivers/gpu/drm/i915/display/i9xx_wm.c index 591acce2a4b1..060aff765994 100644 --- a/drivers/gpu/drm/i915/display/i9xx_wm.c +++ b/drivers/gpu/drm/i915/display/i9xx_wm.c @@ -3,6 +3,8 @@ * Copyright © 2023 Intel Corporation */ +#include <linux/iopoll.h> + #include "soc/intel_dram.h" #include "i915_drv.h" @@ -112,6 +114,7 @@ static const struct cxsr_latency *pnv_get_cxsr_latency(struct intel_display *dis static void chv_set_memory_dvfs(struct intel_display *display, bool enable) { u32 val; + int ret; vlv_punit_get(display->drm); @@ -124,8 +127,10 @@ static void chv_set_memory_dvfs(struct intel_display *display, bool enable) val |= FORCE_DDR_FREQ_REQ_ACK; vlv_punit_write(display->drm, PUNIT_REG_DDR_SETUP2, val); - if (wait_for((vlv_punit_read(display->drm, PUNIT_REG_DDR_SETUP2) & - FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) + ret = poll_timeout_us(val = vlv_punit_read(display->drm, PUNIT_REG_DDR_SETUP2), + (val & FORCE_DDR_FREQ_REQ_ACK) == 0, + 500, 3000, false); + if (ret) drm_err(display->drm, "timed out waiting for Punit DDR DVFS request\n"); @@ -3905,6 +3910,7 @@ static void vlv_wm_get_hw_state(struct intel_display *display) struct vlv_wm_values *wm = &display->wm.vlv; struct intel_crtc *crtc; u32 val; + int ret; vlv_read_wm_values(display, wm); @@ -3931,8 +3937,10 @@ static void vlv_wm_get_hw_state(struct intel_display *display) val |= FORCE_DDR_FREQ_REQ_ACK; vlv_punit_write(display->drm, PUNIT_REG_DDR_SETUP2, val); - if (wait_for((vlv_punit_read(display->drm, PUNIT_REG_DDR_SETUP2) & - FORCE_DDR_FREQ_REQ_ACK) == 0, 3)) { + ret = poll_timeout_us(val = vlv_punit_read(display->drm, PUNIT_REG_DDR_SETUP2), + (val & FORCE_DDR_FREQ_REQ_ACK) == 0, + 500, 3000, false); + if (ret) { drm_dbg_kms(display->drm, "Punit not acking DDR DVFS request, " "assuming DDR DVFS is disabled\n"); -- 2.47.2