On Mon, Apr 14, 2014 at 11:00:34AM +0530, Shobhit Kumar wrote:
> The parser extracts the config block(#52) and sequence(#53) data
> and store in private data structures.
>
> v2: Address review comments by Jani
> - adjust code for the structure changes for bdb_mipi_config
> - add boundry and buffer overflow checks as suggested
> - use kmemdup instead of kmalloc and memcpy
>
> v3: More strict check while parsing VBT
> - Ensure that at anytime we do not go beyond sequence block
> while parsing
> - On unknown element fail the whole parsing
>
> v4: Style changes and spell check mostly as suggested by Jani
>
> Signed-off-by: Shobhit Kumar <shobhit.ku...@intel.com>
> Reviewed-by: Jani Nikula <jani.nik...@intel.com>
I didn't spot Jani's r-b tag in earlier mails, was that done off-list?
-Daniel
> ---
> drivers/gpu/drm/i915/i915_drv.h | 6 ++
> drivers/gpu/drm/i915/intel_bios.c | 204
> +++++++++++++++++++++++++++++++++++++-
> drivers/gpu/drm/i915/intel_bios.h | 31 ++++++
> 3 files changed, 236 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 85e362f..1b763aa 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1170,6 +1170,12 @@ struct intel_vbt_data {
> /* MIPI DSI */
> struct {
> u16 panel_id;
> + struct mipi_config *config;
> + struct mipi_pps_data *pps;
> + u8 seq_version;
> + u32 size;
> + u8 *data;
> + u8 *sequence[MIPI_SEQ_MAX];
> } dsi;
>
> int crt_ddc_pin;
> diff --git a/drivers/gpu/drm/i915/intel_bios.c
> b/drivers/gpu/drm/i915/intel_bios.c
> index 862ca04..917f5bb 100644
> --- a/drivers/gpu/drm/i915/intel_bios.c
> +++ b/drivers/gpu/drm/i915/intel_bios.c
> @@ -636,19 +636,213 @@ parse_edp(struct drm_i915_private *dev_priv, struct
> bdb_header *bdb)
> }
> }
>
> +static u8 *goto_next_sequence(u8 *data, int *size)
> +{
> + u16 len;
> + int tmp = *size;
> +
> + if (--tmp < 0)
> + return NULL;
> +
> + /* goto first element */
> + data++;
> + while (1) {
> + switch (*data) {
> + case MIPI_SEQ_ELEM_SEND_PKT:
> + /*
> + * skip by this element payload size
> + * skip elem id, command flag and data type
> + */
> + if ((tmp = tmp - 5) < 0)
> + return NULL;
> +
> + data += 3;
> + len = *((u16 *)data);
> +
> + if ((tmp = tmp - len) < 0)
> + return NULL;
> +
> + /* skip by len */
> + data = data + 2 + len;
> + break;
> + case MIPI_SEQ_ELEM_DELAY:
> + /* skip by elem id, and delay is 4 bytes */
> + if ((tmp = tmp - 5) < 0)
> + return NULL;
> +
> + data += 5;
> + break;
> + case MIPI_SEQ_ELEM_GPIO:
> + if ((tmp = tmp - 3) < 0)
> + return NULL;
> +
> + data += 3;
> + break;
> + default:
> + DRM_ERROR("Unknown element\n");
> + return NULL;
> + }
> +
> + /* end of sequence ? */
> + if (*data == 0)
> + break;
> + }
> +
> + /* goto next sequence or end of block byte */
> + if (--tmp < 0)
> + return NULL;
> +
> + data++;
> +
> + /* update amount of data left for the sequence block to be parsed */
> + *size = tmp;
> + return data;
> +}
> +
> static void
> parse_mipi(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
> {
> - struct bdb_mipi *mipi;
> + struct bdb_mipi_config *start;
> + struct bdb_mipi_sequence *sequence;
> + struct mipi_config *config;
> + struct mipi_pps_data *pps;
> + u8 *data, *seq_data;
> + int i, panel_id, seq_size;
> + u16 block_size;
> +
> + /* Initialize this to undefined indicating no generic MIPI support */
> + dev_priv->vbt.dsi.panel_id = MIPI_DSI_UNDEFINED_PANEL_ID;
> +
> + /* Block #40 is already parsed and panel_fixed_mode is
> + * stored in dev_priv->lfp_lvds_vbt_mode
> + * resuse this when needed
> + */
>
> - mipi = find_section(bdb, BDB_MIPI_CONFIG);
> - if (!mipi) {
> - DRM_DEBUG_KMS("No MIPI BDB found");
> + /* Parse #52 for panel index used from panel_type already
> + * parsed
> + */
> + start = find_section(bdb, BDB_MIPI_CONFIG);
> + if (!start) {
> + DRM_DEBUG_KMS("No MIPI config BDB found");
> return;
> }
>
> - /* XXX: add more info */
> + DRM_DEBUG_DRIVER("Found MIPI Config block, panel index = %d\n",
> + panel_type);
> +
> + /*
> + * get hold of the correct configuration block and pps data as per
> + * the panel_type as index
> + */
> + config = &start->config[panel_type];
> + pps = &start->pps[panel_type];
> +
> + /* store as of now full data. Trim when we realise all is not needed */
> + dev_priv->vbt.dsi.config = kmemdup(config, sizeof(struct mipi_config),
> GFP_KERNEL);
> + if (!dev_priv->vbt.dsi.config)
> + return;
> +
> + dev_priv->vbt.dsi.pps = kmemdup(pps, sizeof(struct mipi_pps_data),
> GFP_KERNEL);
> + if (!dev_priv->vbt.dsi.pps) {
> + kfree(dev_priv->vbt.dsi.config);
> + return;
> + }
> +
> + /* We have mandatory mipi config blocks. Initialize as generic panel */
> dev_priv->vbt.dsi.panel_id = MIPI_DSI_GENERIC_PANEL_ID;
> +
> + /* Check if we have sequence block as well */
> + sequence = find_section(bdb, BDB_MIPI_SEQUENCE);
> + if (!sequence) {
> + DRM_DEBUG_KMS("No MIPI Sequence found, parsing complete\n");
> + return;
> + }
> +
> + DRM_DEBUG_DRIVER("Found MIPI sequence block\n");
> +
> + block_size = get_blocksize(sequence);
> +
> + /*
> + * parse the sequence block for individual sequences
> + */
> + dev_priv->vbt.dsi.seq_version = sequence->version;
> +
> + seq_data = &sequence->data[0];
> +
> + /*
> + * sequence block is variable length and hence we need to parse and
> + * get the sequence data for specific panel id
> + */
> + for (i = 0; i < MAX_MIPI_CONFIGURATIONS; i++) {
> + panel_id = *seq_data;
> + seq_size = *((u16 *) (seq_data + 1));
> + if (panel_id == panel_type)
> + break;
> +
> + /* skip the sequence including seq header of 3 bytes */
> + seq_data = seq_data + 3 + seq_size;
> + if ((seq_data - &sequence->data[0]) > block_size) {
> + DRM_ERROR("Sequence start is beyond sequence block
> size, corrupted sequence block\n");
> + return;
> + }
> + }
> +
> + if (i == MAX_MIPI_CONFIGURATIONS) {
> + DRM_ERROR("Sequence block detected but no valid
> configuration\n");
> + return;
> + }
> +
> + /* check if found sequence is completely within the sequence block
> + * just being paranoid */
> + if (seq_size > block_size) {
> + DRM_ERROR("Corrupted sequence/size, bailing out\n");
> + return;
> + }
> +
> + /* skip the panel id(1 byte) and seq size(2 bytes) */
> + dev_priv->vbt.dsi.data = kmemdup(seq_data + 3, seq_size, GFP_KERNEL);
> + if (!dev_priv->vbt.dsi.data)
> + return;
> +
> + /*
> + * loop into the sequence data and split into multiple sequneces
> + * There are only 5 types of sequences as of now
> + */
> + data = dev_priv->vbt.dsi.data;
> + dev_priv->vbt.dsi.size = seq_size;
> +
> + /* two consecutive 0x00 indicate end of all sequences */
> + while (1) {
> + int seq_id = *data;
> + if (MIPI_SEQ_MAX > seq_id && seq_id > MIPI_SEQ_UNDEFINED) {
> + dev_priv->vbt.dsi.sequence[seq_id] = data;
> + DRM_DEBUG_DRIVER("Found mipi sequence - %d\n", seq_id);
> + } else {
> + DRM_ERROR("undefined sequence\n");
> + goto err;
> + }
> +
> + /* partial parsing to skip elements */
> + data = goto_next_sequence(data, &seq_size);
> +
> + if (data == NULL) {
> + DRM_ERROR("Sequence elements going beyond block itself.
> Sequence block parsing failed\n");
> + goto err;
> + }
> +
> + if (*data == 0)
> + break; /* end of sequence reached */
> + }
> +
> + DRM_DEBUG_DRIVER("MIPI related vbt parsing complete\n");
> + return;
> +err:
> + kfree(dev_priv->vbt.dsi.data);
> + dev_priv->vbt.dsi.data = NULL;
> +
> + /* error during parsing so set all pointers to null
> + * because of partial parsing */
> + memset(dev_priv->vbt.dsi.sequence, 0, MIPI_SEQ_MAX);
> }
>
> static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
> diff --git a/drivers/gpu/drm/i915/intel_bios.h
> b/drivers/gpu/drm/i915/intel_bios.h
> index 036a799..6009deb 100644
> --- a/drivers/gpu/drm/i915/intel_bios.h
> +++ b/drivers/gpu/drm/i915/intel_bios.h
> @@ -899,4 +899,35 @@ struct bdb_mipi_sequence {
> u8 data[0];
> };
>
> +/* MIPI Sequnece Block definitions */
> +enum mipi_seq {
> + MIPI_SEQ_UNDEFINED = 0,
> + MIPI_SEQ_ASSERT_RESET,
> + MIPI_SEQ_INIT_OTP,
> + MIPI_SEQ_DISPLAY_ON,
> + MIPI_SEQ_DISPLAY_OFF,
> + MIPI_SEQ_DEASSERT_RESET,
> + MIPI_SEQ_MAX
> +};
> +
> +enum mipi_seq_element {
> + MIPI_SEQ_ELEM_UNDEFINED = 0,
> + MIPI_SEQ_ELEM_SEND_PKT,
> + MIPI_SEQ_ELEM_DELAY,
> + MIPI_SEQ_ELEM_GPIO,
> + MIPI_SEQ_ELEM_STATUS,
> + MIPI_SEQ_ELEM_MAX
> +};
> +
> +enum mipi_gpio_pin_index {
> + MIPI_GPIO_UNDEFINED = 0,
> + MIPI_GPIO_PANEL_ENABLE,
> + MIPI_GPIO_BL_ENABLE,
> + MIPI_GPIO_PWM_ENABLE,
> + MIPI_GPIO_RESET_N,
> + MIPI_GPIO_PWR_DOWN_R,
> + MIPI_GPIO_STDBY_RST_N,
> + MIPI_GPIO_MAX
> +};
> +
> #endif /* _I830_BIOS_H_ */
> --
> 1.8.3.2
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
