Program the rest of the steps with regards to PORT_CLOCK_CTL in Non-TBT PLL enable sequence.
Signed-off-by: Suraj Kandpal <[email protected]> Reviewed-by: Arun R Murthy <[email protected]> --- drivers/gpu/drm/i915/display/intel_lt_phy.c | 25 +++++++++++++++++++ .../gpu/drm/i915/display/intel_lt_phy_regs.h | 1 + 2 files changed, 26 insertions(+) diff --git a/drivers/gpu/drm/i915/display/intel_lt_phy.c b/drivers/gpu/drm/i915/display/intel_lt_phy.c index 281f4c5eb4a1..1b2d373e05ba 100644 --- a/drivers/gpu/drm/i915/display/intel_lt_phy.c +++ b/drivers/gpu/drm/i915/display/intel_lt_phy.c @@ -1489,6 +1489,8 @@ void intel_lt_phy_pll_enable(struct intel_encoder *encoder, struct intel_digital_port *dig_port = enc_to_dig_port(encoder); bool lane_reversal = dig_port->lane_reversal; u8 owned_lane_mask = intel_lt_phy_get_owned_lane_mask(encoder); + enum phy phy = intel_encoder_to_phy(encoder); + enum port port = encoder->port; intel_wakeref_t wakeref = 0; wakeref = intel_lt_phy_transaction_begin(encoder); @@ -1529,19 +1531,42 @@ void intel_lt_phy_pll_enable(struct intel_encoder *encoder, LT_PHY_PCLKIN_GATE); /* 7. Program PORT_CLOCK_CTL[PCLK PLL Request LN0] = 0. */ + intel_de_rmw(display, XELPDP_PORT_CLOCK_CTL(display, port), + XELPDP_LANE_PCLK_PLL_REQUEST(0), 0); + /* 8. Poll for PORT_CLOCK_CTL[PCLK PLL Ack LN0]= 0. */ + if (intel_de_wait_custom(display, XELPDP_PORT_CLOCK_CTL(display, port), + XELPDP_LANE_PCLK_PLL_ACK(0), 0, + XE3PLPD_MACCLK_TURNOFF_LATENCY_US, 0, NULL)) + drm_warn(display->drm, "PHY %c PLL MacCLK Ack deassertion Timeout after %dus.\n", + phy_name(phy), XE3PLPD_MACCLK_TURNOFF_LATENCY_US); + /* * 9. Follow the Display Voltage Frequency Switching - Sequence Before Frequency * Change. We handle this step in bxt_set_cdclk(). */ /* 10. Program DDI_CLK_VALFREQ to match intended DDI clock frequency. */ /* 11. Program PORT_CLOCK_CTL[PCLK PLL Request LN0] = 1. */ + intel_de_rmw(display, XELPDP_PORT_CLOCK_CTL(display, port), + XELPDP_LANE_PCLK_PLL_REQUEST(0), + XELPDP_LANE_PCLK_PLL_REQUEST(0)); + /* 12. Poll for PORT_CLOCK_CTL[PCLK PLL Ack LN0]= 1. */ + if (intel_de_wait_custom(display, XELPDP_PORT_CLOCK_CTL(display, port), + XELPDP_LANE_PCLK_PLL_ACK(0), + XELPDP_LANE_PCLK_PLL_ACK(0), + XE3PLPD_MACCLK_TURNON_LATENCY_US, 2, NULL)) + drm_warn(display->drm, "PHY %c PLL MacCLK Ack assertion Timeout after %dus.\n", + phy_name(phy), XE3PLPD_MACCLK_TURNON_LATENCY_US); } else { intel_de_write(display, DDI_CLK_VALFREQ(encoder->port), crtc_state->port_clock); } /* 13. Ungate the forward clock by setting PORT_CLOCK_CTL[Forward Clock Ungate] = 1. */ + intel_de_rmw(display, XELPDP_PORT_CLOCK_CTL(display, port), + XELPDP_FORWARD_CLOCK_UNGATE, + XELPDP_FORWARD_CLOCK_UNGATE); + /* 14. SW clears PORT_BUF_CTL2 [PHY Pulse Status]. */ /* * 15. Clear the PHY VDR register 0xCC4[Rate Control VDR Update] over PHY message bus for diff --git a/drivers/gpu/drm/i915/display/intel_lt_phy_regs.h b/drivers/gpu/drm/i915/display/intel_lt_phy_regs.h index eb3a3dd53ab8..06829ab28b7c 100644 --- a/drivers/gpu/drm/i915/display/intel_lt_phy_regs.h +++ b/drivers/gpu/drm/i915/display/intel_lt_phy_regs.h @@ -9,6 +9,7 @@ #define XE3PLPD_MSGBUS_TIMEOUT_FAST_US 500 #define XE3PLPD_MACCLK_TURNON_LATENCY_MS 1 #define XE3PLPD_MACCLK_TURNON_LATENCY_US 21 +#define XE3PLPD_MACCLK_TURNOFF_LATENCY_US 1 #define XE3PLPD_RATE_CALIB_DONE_LATENCY_US 50 #define XE3PLPD_RESET_START_LATENCY_US 10 #define XE3PLPD_RESET_END_LATENCY_US 200 -- 2.34.1
