On Tue, 22 Sep 2015, Jesse Barnes <[email protected]> wrote:
> On HSW at least (still testing other platforms, but should be harmless
> elsewhere), the DSL reg reads back as 0 when read around vblank start
> time. This ends up confusing the atomic start/end checking code, since
> it causes the update to appear as if it crossed a frame count boundary.
> Avoid the problem by making sure we don't return scanline_offset from
> the get_crtc_scanline function. In moving the code there, I add to add
> an additional delay since it could be called and have a legitimate 0
> result for some time (depending on the pixel clock).
>
> v2: move hsw dsl read hack to get_crtc_scanline (Ville)
> v3: use break instead of goto (Ville)
> update comment with workaround details (Ville)
>
> References: https://bugs.freedesktop.org/show_bug.cgi?id=91579
> Signed-off-by: Jesse Barnes <[email protected]>
Pushed to drm-intel-fixes, thanks for the patch and review.
Sorry for the delay, I failed to notice the patch had been reviewed. It
would have helped if the patch had the Reviewed-by: tag already in
place, or the reviewer (or someone else pointing at the review) had
replied with the Reviewed-by: tag. I spend very little time looking at
individual patches, especially if the appearance is that there's
discussion going on.
BR,
Jani.
> ---
> drivers/gpu/drm/i915/i915_irq.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 1f53061..a8aa797 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -697,6 +697,32 @@ static int __intel_get_crtc_scanline(struct intel_crtc
> *crtc)
> position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) &
> DSL_LINEMASK_GEN3;
>
> /*
> + * On HSW, the DSL reg (0x70000) appears to return 0 if we
> + * read it just before the start of vblank. So try it again
> + * so we don't accidentally end up spanning a vblank frame
> + * increment, causing the pipe_update_end() code to squak at us.
> + *
> + * The nature of this problem means we can't simply check the ISR
> + * bit and return the vblank start value; nor can we use the scanline
> + * debug register in the transcoder as it appears to have the same
> + * problem. We may need to extend this to include other platforms,
> + * but so far testing only shows the problem on HSW.
> + */
> + if (IS_HASWELL(dev) && !position) {
> + int i, temp;
> +
> + for (i = 0; i < 100; i++) {
> + udelay(1);
> + temp = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) &
> + DSL_LINEMASK_GEN3;
> + if (temp != position) {
> + position = temp;
> + break;
> + }
> + }
> + }
> +
> + /*
> * See update_scanline_offset() for the details on the
> * scanline_offset adjustment.
> */
> --
> 1.9.1
>
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
