On Fri, 25 Sep 2015 10:01:48 +0200,
Jani Nikula wrote:
>
> On Fri, 25 Sep 2015, [email protected] wrote:
> > From: Libin Yang <[email protected]>
> >
> > When modeset occurs and the TMDS frequency is set to some
> > speical values, the N/CTS need to be set manually if audio
> > is playing.
> >
> > Signed-off-by: Libin Yang <[email protected]>
>
> Reviewed-by: Jani Nikula <[email protected]>
Now all 4 patches are applied to topic/drm-sync-audio-rate.
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
topic/drm-sync-audio-rate
It was merged back to sound for-next branch, too.
Feel free to merge this branch into drm tree.
thanks,
Takashi
>
>
> > ---
> > drivers/gpu/drm/i915/intel_audio.c | 57
> > ++++++++++++++++++++++++++++++++------
> > include/drm/i915_component.h | 10 +++++++
> > 2 files changed, 58 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_audio.c
> > b/drivers/gpu/drm/i915/intel_audio.c
> > index e3c32ce..642dfbd 100644
> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > @@ -128,6 +128,20 @@ static int audio_config_get_n(const struct
> > drm_display_mode *mode, int rate)
> > return 0;
> > }
> >
> > +static uint32_t audio_config_setup_n_reg(int n, uint32_t val)
> > +{
> > + int n_low, n_up;
> > + uint32_t tmp = val;
> > +
> > + n_low = n & 0xfff;
> > + n_up = (n >> 12) & 0xff;
> > + tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK);
> > + tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
> > + (n_low << AUD_CONFIG_LOWER_N_SHIFT) |
> > + AUD_CONFIG_N_PROG_ENABLE);
> > + return tmp;
> > +}
> > +
> > /* check whether N/CTS/M need be set manually */
> > static bool audio_rate_need_prog(struct intel_crtc *crtc,
> > struct drm_display_mode *mode)
> > @@ -262,9 +276,14 @@ static void hsw_audio_codec_enable(struct
> > drm_connector *connector,
> > struct drm_i915_private *dev_priv = connector->dev->dev_private;
> > struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
> > enum pipe pipe = intel_crtc->pipe;
> > + struct i915_audio_component *acomp = dev_priv->audio_component;
> > const uint8_t *eld = connector->eld;
> > + struct intel_digital_port *intel_dig_port =
> > + enc_to_dig_port(&encoder->base);
> > + enum port port = intel_dig_port->port;
> > uint32_t tmp;
> > int len, i;
> > + int n, rate;
> >
> > DRM_DEBUG_KMS("Enable audio codec on pipe %c, %u bytes ELD\n",
> > pipe_name(pipe), drm_eld_size(eld));
> > @@ -302,12 +321,29 @@ static void hsw_audio_codec_enable(struct
> > drm_connector *connector,
> > /* Enable timestamps */
> > tmp = I915_READ(HSW_AUD_CFG(pipe));
> > tmp &= ~AUD_CONFIG_N_VALUE_INDEX;
> > - tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > tmp &= ~AUD_CONFIG_PIXEL_CLOCK_HDMI_MASK;
> > if (intel_pipe_has_type(intel_crtc, INTEL_OUTPUT_DISPLAYPORT))
> > tmp |= AUD_CONFIG_N_VALUE_INDEX;
> > else
> > tmp |= audio_config_hdmi_pixel_clock(mode);
> > +
> > + tmp &= ~AUD_CONFIG_N_PROG_ENABLE;
> > + if (audio_rate_need_prog(intel_crtc, mode)) {
> > + if (!acomp)
> > + rate = 0;
> > + else if (port >= PORT_A && port <= PORT_E)
> > + rate = acomp->aud_sample_rate[port];
> > + else {
> > + DRM_ERROR("invalid port: %d\n", port);
> > + rate = 0;
> > + }
> > + n = audio_config_get_n(mode, rate);
> > + if (n != 0)
> > + tmp = audio_config_setup_n_reg(n, tmp);
> > + else
> > + DRM_DEBUG_KMS("no suitable N value is found\n");
> > + }
> > +
> > I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> >
> > mutex_unlock(&dev_priv->av_mutex);
> > @@ -594,9 +630,10 @@ static int i915_audio_component_sync_audio_rate(struct
> > device *dev,
> > struct intel_digital_port *intel_dig_port;
> > struct intel_crtc *crtc;
> > struct drm_display_mode *mode;
> > + struct i915_audio_component *acomp = dev_priv->audio_component;
> > enum pipe pipe = -1;
> > u32 tmp;
> > - int n_low, n_up, n;
> > + int n;
> >
> > /* HSW, BDW SKL need this fix */
> > if (!IS_SKYLAKE(dev_priv) &&
> > @@ -630,6 +667,9 @@ static int i915_audio_component_sync_audio_rate(struct
> > device *dev,
> > pipe_name(pipe), port_name(port));
> > mode = &crtc->config->base.adjusted_mode;
> >
> > + /* port must be valid now, otherwise the pipe will be invalid */
> > + acomp->aud_sample_rate[port] = rate;
> > +
> > /* 2. check whether to set the N/CTS/M manually or not */
> > if (!audio_rate_need_prog(crtc, mode)) {
> > tmp = I915_READ(HSW_AUD_CFG(pipe));
> > @@ -649,15 +689,10 @@ static int
> > i915_audio_component_sync_audio_rate(struct device *dev,
> > mutex_unlock(&dev_priv->av_mutex);
> > return 0;
> > }
> > - n_low = n & 0xfff;
> > - n_up = (n >> 12) & 0xff;
> >
> > - /* 4. set the N/CTS/M */
> > + /* 3. set the N/CTS/M */
> > tmp = I915_READ(HSW_AUD_CFG(pipe));
> > - tmp &= ~(AUD_CONFIG_UPPER_N_MASK | AUD_CONFIG_LOWER_N_MASK);
> > - tmp |= ((n_up << AUD_CONFIG_UPPER_N_SHIFT) |
> > - (n_low << AUD_CONFIG_LOWER_N_SHIFT) |
> > - AUD_CONFIG_N_PROG_ENABLE);
> > + tmp = audio_config_setup_n_reg(n, tmp);
> > I915_WRITE(HSW_AUD_CFG(pipe), tmp);
> >
> > mutex_unlock(&dev_priv->av_mutex);
> > @@ -678,6 +713,7 @@ static int i915_audio_component_bind(struct device
> > *i915_dev,
> > {
> > struct i915_audio_component *acomp = data;
> > struct drm_i915_private *dev_priv = dev_to_i915(i915_dev);
> > + int i;
> >
> > if (WARN_ON(acomp->ops || acomp->dev))
> > return -EEXIST;
> > @@ -685,6 +721,9 @@ static int i915_audio_component_bind(struct device
> > *i915_dev,
> > drm_modeset_lock_all(dev_priv->dev);
> > acomp->ops = &i915_audio_component_ops;
> > acomp->dev = i915_dev;
> > + BUILD_BUG_ON(MAX_PORTS != I915_MAX_PORTS);
> > + for (i = 0; i < ARRAY_SIZE(acomp->aud_sample_rate); i++)
> > + acomp->aud_sample_rate[i] = 0;
> > dev_priv->audio_component = acomp;
> > drm_modeset_unlock_all(dev_priv->dev);
> >
> > diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
> > index e6d35d7..89dc7d6 100644
> > --- a/include/drm/i915_component.h
> > +++ b/include/drm/i915_component.h
> > @@ -24,8 +24,18 @@
> > #ifndef _I915_COMPONENT_H_
> > #define _I915_COMPONENT_H_
> >
> > +/* MAX_PORT is the number of port
> > + * It must be sync with I915_MAX_PORTS defined i915_drv.h
> > + * 5 should be enough as only HSW, BDW, SKL need such fix.
> > + */
> > +#define MAX_PORTS 5
> > +
> > struct i915_audio_component {
> > struct device *dev;
> > + /**
> > + * @aud_sample_rate: the array of audio sample rate per port
> > + */
> > + int aud_sample_rate[MAX_PORTS];
> >
> > const struct i915_audio_component_ops {
> > struct module *owner;
> > --
> > 1.9.1
> >
>
> --
> Jani Nikula, Intel Open Source Technology Center
>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
