On Haswell/Broadwell, the HD-Audio block is inside the HDMI/display
power well and so the sna-hda audio codec acquires the display power
well while it is operational. However, Skylake separates the powerwells
again, but yet we still need the audio powerwell to setup the registers.
(But then the hardware uses those registers even while powered off???)

v2: Grab both rpm wakelock and audio wakelock

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214
Fixes: 03b135cebc47 "ALSA: hda - remove dependency on i915 power well for SKL")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Libin Yang <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Marius Vlad <[email protected]>
Tested-by: Hans de Goede <[email protected]>
Cc: [email protected]
---
 drivers/gpu/drm/i915/intel_audio.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_audio.c 
b/drivers/gpu/drm/i915/intel_audio.c
index 5d5f6bc10e85..948a7a52e3f8 100644
--- a/drivers/gpu/drm/i915/intel_audio.c
+++ b/drivers/gpu/drm/i915/intel_audio.c
@@ -600,6 +600,8 @@ static void i915_audio_component_codec_wake_override(struct 
device *dev,
        if (!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv))
                return;
 
+       i915_audio_component_get_power(dev);
+
        /*
         * Enable/disable generating the codec wake signal, overriding the
         * internal logic to generate the codec wake to controller.
@@ -615,6 +617,8 @@ static void i915_audio_component_codec_wake_override(struct 
device *dev,
                I915_WRITE(HSW_AUD_CHICKENBIT, tmp);
                usleep_range(1000, 1500);
        }
+
+       i915_audio_component_put_power(dev);
 }
 
 /* Get CDCLK in kHz  */
@@ -648,6 +652,7 @@ static int i915_audio_component_sync_audio_rate(struct 
device *dev,
            !IS_HASWELL(dev_priv))
                return 0;
 
+       i915_audio_component_get_power(dev);
        mutex_lock(&dev_priv->av_mutex);
        /* 1. get the pipe */
        intel_encoder = dev_priv->dig_port_map[port];
@@ -698,6 +703,7 @@ static int i915_audio_component_sync_audio_rate(struct 
device *dev,
 
  unlock:
        mutex_unlock(&dev_priv->av_mutex);
+       i915_audio_component_put_power(dev);
        return err;
 }
 
-- 
2.8.1

_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to