Well, bench results have been mixed, with midrange nvidias and atis scoring lower than intel chipsets, but uncleferassi results are strangely high. I do have to test a compatible version of rev 3, because higher results than midrange gpus look promising, even if they were had with a core 2 duo, while the majority of users here have core duos, celerons and atoms.
On Oct 3, 2:28 am, AngelicTears <[email protected]> wrote: > well, the V1.2 Sherry Rev 2 is a overhaul core of the V1.1...so it might > work with the value enabled...as i said before on the post above, deleting > the value making the acceleration at full blown level...as Uncleferassi > said...yes u have said that while other device driver which doesnt have that > value will turn on the full acceleration but not the 945...i guess in theory > the V1.2 Sherry acts like another brand driver, and not intel...so the > effects might be different...i see that uncle ferassi's results are way > higher with the value deleted...and much lower when the value present on > both value 0, 4 and 5...im gonna test it after i finish up some of the rev 3 > codes and V1.3 platform... > > On Sun, Oct 3, 2010 at 7:18 AM, UncleFerassi <[email protected]> wrote: > > I don't really wanna overwork Hussam because I think he's already > > doing alot with the CP, but maybe this could be implemented with it? > > > On Oct 2, 4:15 pm, tribaljet <[email protected]> wrote: > > > Well, this feature is something that can be somewhat easily added to a > > > possibly UICP by one of our capable developers, but that's just me > > > thinking out loud... > > > > On Oct 3, 12:10 am, UncleFerassi <[email protected]> wrote: > > > > > :( > > > > Kk imma try to find another and post it. > > > > > On Oct 2, 4:01 pm, tribaljet <[email protected]> wrote: > > > > > > Well, I was hoping for a more common cli usage, but it works. The > > > > > thing is that it only does half the job, namely with addreg apps, not > > > > > plain apps :( > > > > > > On Oct 2, 11:58 pm, UncleFerassi <[email protected]> wrote: > > > > > > > :S > > > > > > try checking out the utility that i posted. You might use it and > > find > > > > > > it helpful. > > > > > > > On Oct 2, 3:44 pm, tribaljet <[email protected]> wrote: > > > > > > > > Unfortunately I don't have the link anymore :S but was the same > > place > > > > > > > where I found about accel value changes in xp and vista kernel. > > > > > > > > On Oct 2, 11:40 pm, UncleFerassi <[email protected]> wrote: > > > > > > > > > Where did you find that out? > > > > > > > > > On Oct 2, 3:36 pm, tribaljet <[email protected]> wrote: > > > > > > > > > > Deleting the key will only set 965 chipsets, atis and nvidias > > to full > > > > > > > > > accel. Mobile 945 chipsets have a lower default setting. > > > > > > > > > > On Oct 2, 11:31 pm, UncleFerassi <[email protected]> > > wrote: > > > > > > > > > > > "quote" > > > > > > > > > > Search the registry hive: > > > > > > > > > > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Video > > > > > > > > > > for > > > > > > > > > > Acceleration.Level > > > > > > > > > > > If that key exists a setting of 5 will turn off > > acceleration. > > > > > > > > > > Deleting the key will set acceleration to full. > > > > > > > > > > "quote" > > > > > > > > > > got from herehttp:// > > forums.techsmith.com/archive/index.php/t-914.html > > > > > > > > > > > On Oct 2, 3:29 pm, tribaljet <[email protected]> > > wrote: > > > > > > > > > > > > How did you find that out, where do you see which value > > it sets? And > > > > > > > > > > > where did you delete Acceleration.Level? > > > > > > > > > > > > On Oct 2, 11:28 pm, UncleFerassi <[email protected]> > > wrote: > > > > > > > > > > > > > I also found out that if you delete the > > Acceleration.Level key, it > > > > > > > > > > > > automatically enables full acceleration, so you don't > > have to manually > > > > > > > > > > > > add the key and put the value as 0. > > > > > > > > > > > > > On Oct 2, 3:22 pm, tribaljet <[email protected]> > > wrote: > > > > > > > > > > > > > > Yes, it is in CurrentControlSet as well, being > > ControlSet001's copy as > > > > > > > > > > > > > long as 001 is the active set. The thing I forgot to > > mention is that > > > > > > > > > > > > > when changing Acceleration.Level, one must do/add it > > in both 0000 and > > > > > > > > > > > > > 0001 folder, as from what I've understood, if you > > change/add > > > > > > > > > > > > > Acceleration.Level value to 0 in 0001 folder, only > > apps with value 1 > > > > > > > > > > > > > addreg will benefit from such changes. > > > > > > > > > > > > > > On Oct 2, 11:16 pm, UncleFerassi < > > [email protected]> wrote: > > > > > > > > > > > > > > > I did some researching and it seems like this key > > is also supposed to > > > > > > > > > > > > > > show up in > > HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video > > > > > > > > > > > > > > Tribal, please verify. > > > > > > > > > > > > > > > On Oct 2, 1:16 pm, UncleFerassi < > > [email protected]> wrote: > > > > > > > > > > > > > > > > My specs: > > > > > > > > > > > > > > > > Operating System > > > > > > > > > > > > > > > MS Windows 7 Ultimate 32-bit SP1 > > > > > > > > > > > > > > > > CPU > > > > > > > > > > > > > > > Intel Mobile Core 2 Duo T7200 @ 2.00GHz > > 49 °C > > > > > > > > > > > > > > > Merom 65nm Technology > > > > > > > > > > > > > > > > RAM > > > > > > > > > > > > > > > 2.0GB Dual-Channel DDR2 @ 332MHz (5-5-5-15) > > > > > > > > > > > > > > > > Motherboard > > > > > > > > > > > > > > > Dell Inc. 0TD761 (Microprocessor) > > > > > > > > > > > > > > > > Graphics > > > > > > > > > > > > > > > Generic PnP Monitor @ 1440x900 > > > > > > > > > > > > > > > V1.2 Sherry Driver for 945 > > > > > > > > > > > > > > > V1.2 Sherry Driver for 945 > > > > > > > > > > > > > > > > Hard Drives > > > > > > > > > > > > > > > 98GB Seagate ST910021AS ATA Device (Unknown > > Interface) 33 °C > > > > > > > > > > > > > > > > Optical Drives > > > > > > > > > > > > > > > No optical disk drives detected > > > > > > > > > > > > > > > > Audio > > > > > > > > > > > > > > > High Definition Audio Device > > > > > > > > > > > > > > > > Just copied from Speccy > > > > > > > > > > > > > > > On Oct 2, 1:11 pm, UncleFerassi < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > Yes > > > > > > > > > > > > > > > > > On Oct 2, 1:10 pm, tribaljet < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > Are those results from your C2D? > > > > > > > > > > > > > > > > > > On Oct 2, 9:07 pm, UncleFerassi < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > Value 0 > > > > > > > > > > > > > > > > > > BitBlt: > > > > > > > > > > > > > > > > > > avg: 1828.2 fps [2142.5 MB/sec] > > > > > > > > > > > > > > > > > > max: 4348.9 fps [5096.3 MB/sec] > > > > > > > > > > > > > > > > > > min: 94.7 fps [110.9 MB/sec] > > > > > > > > > > > > > > > > > > > ReverseBlt: > > > > > > > > > > > > > > > > > > avg: 3353.3 fps [3929.7 MB/sec] > > > > > > > > > > > > > > > > > > max: 4008.8 fps [4697.8 MB/sec] > > > > > > > > > > > > > > > > > > min: 2206.4 fps [2585.7 MB/sec] > > > > > > > > > > > > > > > > > > > Value 4 > > > > > > > > > > > > > > > > > > BitBlt: > > > > > > > > > > > > > > > > > > avg: 1851.6 fps [2169.9 MB/sec] > > > > > > > > > > > > > > > > > > max: 4368.4 fps [5119.2 MB/sec] > > > > > > > > > > > > > > > > > > min: 176.0 fps [206.2 MB/sec] > > > > > > > > > > > > > > > > > > > ReverseBlt: > > > > > > > > > > > > > > > > > > avg: 2480.3 fps [2906.6 MB/sec] > > > > > > > > > > > > > > > > > > max: 3268.9 fps [3830.8 MB/sec] > > > > > > > > > > > > > > > > > > min: 1443.2 fps [1691.2 MB/sec] > > > > > > > > > > > > > > > > > > > Value 5 > > > > > > > > > > > > > > > > > > BitBlt: > > > > > > > > > > > > > > > > > > avg: 1811.4 fps [2122.7 MB/sec] > > > > > > > > > > > > > > > > > > max: 4378.2 fps [5130.7 MB/sec] > > > > > > > > > > > > > > > > > > min: 93.4 fps [109.4 MB/sec] > > > > > > > > > > > > > > > > > > > ReverseBlt: > > > > > > > > > > > > > > > > > > avg: 4009.7 fps [4698.8 MB/sec] > > > > > > > > > > > > > > > > > > max: 4042.1 fps [4736.8 MB/sec] > > > > > > > > > > > > > > > > > > min: 3835.2 fps [4494.4 MB/sec] > > > > > > > > > > > > > > > > > > > On Oct 2, 12:46 pm, tribaljet < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > It's DWORD with hexa base. > > > > > > > > > > > > > > > > > > > > On Oct 2, 8:45 pm, UncleFerassi < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > I gonna try to make the key manually > > but Tribal, can you tell us what > > > > > > > > > > > > > > > > > > > > kind of entry is it? (dsword, string, > > binary?) > > > > > > > > > > > > > > > > > > > > > On Oct 2, 12:43 pm, UncleFerassi < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > Here's mine. Same as Kiki, don't have > > the Acceleration.Level key > > > > > > > > > > > > > > > > > > > > > because I have 1.2 sherry. > > > > > > > > > > > > > > > > > > > > > I ran it with value 1 addreg > > (software) > > > > > > > > > > > > > > > > > > > > > > BitBlt: > > > > > > > > > > > > > > > > > > > > > avg: 3250.2 fps [3808.9 MB/sec] > > > > > > > > > > > > > > > > > > > > > max: 4145.3 fps [4857.8 MB/sec] > > > > > > > > > > > > > > > > > > > > > min: 1128.8 fps [1322.8 MB/sec] > > > > > > > > > > > > > > > > > > > > > > ReverseBlt: > > > > > > > > > > > > > > > > > > > > > avg: 3534.6 fps [4142.2 MB/sec] > > > > > > > > > > > > > > > > > > > > > max: 4050.5 fps [4746.7 MB/sec] > > > > > > > > > > > > > > > > > > > > > min: 2632.8 fps [3085.3 MB/sec] > > > > > > > > > > > > > > > > > > > > > > On Oct 2, 11:44 am, tribaljet < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > > Unless people cooperate, things > > can't go forward. > > > > > > > > > > > > > > > > > > > > > > > Each one of you must test different > > values and benchmark your system > > > > > > > > > > > > > > > > > > > > > > with BltTest. > > > > > > > > > > > > > > > > > > > > > > > On Sep 30, 6:17 pm, tribaljet < > > [email protected]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > I ask for more people to test > > different values and post results of the > > > > > > > > > > > > > > > > > > > > > > > TestBlt bench, so we can have a > > proper opinion on it. > > > > > > > > > > > > > > > > > > > > > > > > Just remember to restart after > > each value change. > > > > > > > > > > > > > > > > > > > > > > > > On Sep 30, 1:55 pm, tribaljet < > > [email protected]> wrote: > > ... > > read more » -- 9xx SOLDIERS SANS FRONTIERS
