Dennis:
--- Dennis O'Reilly wrote:
We use the attached probe to monitor the BGP state for our Cisco and
Juniper routers. Create one device on your map for each BGP peer that
you want to monitor. The "NOLINKS" flag suppresses the polling for
interface MIBs.
--- end of quote ---
Thanks for sending making this custom probe available. I have done two things:
1) I have edited the file to contain backslash ("\") characters in place of the
less-than-or-equal and greater-than-or-equal characters in the text formatting
markup. InterMapper 4.0 and newer treat these (and the left and right chevron
characters (« and ») equivalently, and they're much more likely to
survive transit through an e-mail system. See the description of this new
facility at:
http://www.intermapper.com/immanual/appxb/description.html
2) I have posted this probe on the "Contributions" page, at:
http://www.dartware.com/intermapper/contrib/customprobes.html
And I'll also point out that we'll send an InterMapper T-shirt to anyone who
submits a custom probe, a tip about using InterMapper, or other tidbit that
other customers would like to know. See the T-shirt at:
http://www.intermapper.com/contrib/tshirt.html
Rich Brown
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
