On Apr 25, 2006, at 5:43 AM, Chip Old wrote:
On Mon, 24 Apr 2006 17:01 -0400, William W. Fisher wrote:
On Apr 24, 2006, at 12:35 PM, Chip Old wrote:
We recently upgraded our Barracuda 400 to firmware v3.4.01.003,
then to v3.4.01.004. Both seem to break InterMapper's Barracuda
HTTP probe. InterMapper shows the Barracuda as down and shows
"Gave up connecting to port 8000 after 0 seconds" as the reason.
I'm not sure where the "0 seconds" comes from. The timeout in
InterMapper for the device was the 3 second default, but I've
tried bumping it up to very high values. That doesn't help.
The message "Gave up connecting to port 8000 after 0 seconds"
indicates that InterMapper immediately failed when connecting to
port 8000, perhaps because there isn't anything listening on that
port. This isn't a timeout issue.
TCP port 8000 is the default for the unencrypted Barracuda probe.
Have you tried using the SSL/HTTPS version of the probe? It
connects to port 443 by default.
Our Barracuda is listening on port 8000. If it weren't, we
wouldn't be able to access its Web interface. We don't have it
configured for SSL/HTTPS, so it isn't listening on port 443.
The problem began when we upgraded the Barracuda from firmware v3.3
to v3.4. I'm guessing the problem is related to the fact that v3.4
introduces a large number of changes. We have a case open on the
problem (#47197), so I'm sure it will get figured out.
FWIW, our Barracuda probe (HTTP 8000) stopped allowing our correct
password to connect ("Invalid User or Password"). I suspect a
firmware upgrade was involved. It is so busy fighting spam that up or
down is all we need to know. It has temporarily stopped responding to
pings in heavy spam times.
Rich B2
***Mail Scanned by Barracuda***
Your message could not be processed because you are not allowed to post
messages to the InterMapper Discussion list.
This list only accepts messages from email addresses that are subscribed
to the list. If you think you should be able to post to the list, please
send email to the list administrator using the email account that you'd
like to post messages from.
For more information, you can contact the list administrator at:
Bill Fisher <[EMAIL PROTECTED]>
***Mail Scanned by Barracuda***
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
