Bennie, I am wrong about the import MIB message. The successful import message was added in 4.6.1b2, so in the next release (4.6.1) you will see that message. However, in the current version, a failed import will generate an error message, and a successful import will be logged to the Event log:
08/31 13:45:53 impt MIB file 'RFC1213-MIB-rfc1213.txt' imported correctly Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Bennie Warren Sent: Friday, August 31, 2007 12:31 PM To: InterMapper Discussion Subject: Re: [IM-Talk] Import MIBs Yes on the build a new probe. I already own a full license for unlimited devices for IM. I don't need all the wireless probes in your package. The new radios we bought are the BreezeNET B-B100. I will probably use the probes I have for my other BreezeNET radios to build a probe for these also. I have been an IM customer for years and was one of the heavy complainers when that package came out as everyone helped with input to make them. Just a rant. We will always use IM as it is a great product with good support. Thanks Bennie On Aug 31, 2007, at 9:16 AM, Janice Losgar wrote: > Bennie, > > When you import a MIB successfully, InterMapper will display a message > "Successfully imported MIB...MIB file <filename> imported". > InterMapper > supports two kinds of OID's: Numeric and Symbolic. The Symbolic > OIDs become > available when a MIB has been imported into InterMapper. This will > enhance > the formatting of the trap data displayed in the Event log (if the > device is > configured to send traps to InterMapper), but it will not > automatically > create a probe for the device. It is useful if you are creating > your own > custom SNMP probes, because then you don't have to enter numeric > OIDs when > creating your probe file. Are you trying to create a custom probe > for an > Alvarion radio? InterMapper does provide Alvarion-specific probes > in the > Wireless Add-On pack. > > Regards, > > Janice Losgar > Dartware, LLC > > -----Original Message----- > From: [email protected] > [mailto:[EMAIL PROTECTED] On Behalf Of Bennie Warren > Sent: Friday, August 31, 2007 11:59 AM > To: InterMapper Discussion > Subject: [IM-Talk] Import MIBs > > I just imported a mib file for an Alvarion Radio. How do you know if > it was successful and how do you use it after that? > > Thanks > Bennie > > -- > ************************************** > Bennie Warren > LemooreNet > 237 C Street Lemoore, CA 93245 > Phone: 559.924.5909 Fax 559.924.9578 > [EMAIL PROTECTED] > http://www.lemoorenet.com > ************************************** > > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] > -- ************************************** Bennie Warren LemooreNet 237 C Street Lemoore, CA 93245 Phone: 559.924.5909 Fax 559.924.9578 [EMAIL PROTECTED] http://www.lemoorenet.com ************************************** ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
