That did it! Thanks! Tim Huffman Director of Engineering BOB - Business Only Broadband, LLC O (630) 590-6012 C (630) 340-1925 [EMAIL PROTECTED] www.bobbroadband.com
> -----Original Message----- > From: [email protected] [mailto:InterMapper- > [EMAIL PROTECTED] On Behalf Of William W. Fisher > Sent: Tuesday, September 04, 2007 3:32 PM > To: InterMapper Discussion > Subject: RE: [IM-Talk] Custom probe = extremely high response times > > Tim Huffman wrote: > > Changing to the SNMP MIB-II probe on one of our Dragonwaves causes the > > round-trip time to go from 842msec to 65msec, so there's definitely a > > difference. > > The round-trip time reported for SNMP is the round-trip time of the final > exchange. For custom SNMP probes, this will be > the time to request and respond to the variables in your custom probe. > > You might try adding the following section to your custom probe to see if > it affects the round-trip time. Reducing > "maxvars" to "1" will force InterMapper to request each variable one at a > time. > > <snmp-device-properties> > maxvars = "1" > </snmp-device-properties> > > > Regards, > > Bill Fisher > Dartware, LLC > > ____________________________________________________________________ > List archives: > http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ > To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
