I agree with this. It's a big limitation in IM that makes it unsuitable
for keeping long term trend data. There should ideally be a GUI way to
move chart data. In addition to the example below, we often see
configuration changes move the the logical source of the data around, for
example:
-A primary switch uplink moves from one interface to another.
-An index changes in the HR mib due to a device addition removal, or
net-snmp upgrade.
I think some solution to this would be incredibly useful.
-David
--On Friday, January 8, 2010 3:01 PM +0530 Manickaraja Arumugam
<[email protected]> wrote:
Hi Bill,
I have a requirement may be every InterMapper customer will agree on this
point.
In any organization the network enhancement or upgradation is common now
days.
We had a WAN circuit for past 4 years and the 10+ devices are maintained
by the service provider. This year we have planned for the bandwidth
upgrade on our WAN cloud where ISP recommended upgrading the Router model
from 2800 to 3800 series.
The pain point is after upgradation of the ISP routers we have lost all
history of chart of the Interface traffic to all these devices.
I would request Dartware to find some way to keep this data chart and I
would like to merge the new device chart data into existing chart of the
devices.
If this is already possible please let me know how to do the same. If not
please consider this is a feature request.
Regards
Manickaraja Arumugam
A R I C E N T
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bill Fisher
Sent: Friday, January 08, 2010 4:09 AM
To: [email protected]; [email protected]
Subject: [IM-Talk] Re: Clearing graph historical data
gsemens wrote:
I created a graph for interface utilization and the interface speeds
were incorrect so now the graph axis is way off and useless (20,000
percent). How can I clear the historical data for this graph to make it
useful? I already tried deleting the graph and re-creating it but it
retains the previous information. Thanks.
Here are the steps:
1. Double-click on the chart window to bring up the Chart Options window.
(This should put the map in Edit mode automatically.)
2. Click on the "Data" tab in the Chart Options window.
3. Select the dataset in the chart that you want to clear and click
"Delete...". You will be given the option of specifying the minimum date
and time to keep. Anything before that will be deleted.
--
Bill Fisher
Dartware, LLC
-------------------- m2f --------------------
Read this topic online here:
http://forums.dartware.com/viewtopic.php?p=2110#2110
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
"DISCLAIMER: This message is proprietary to Aricent and is intended
solely for the use of the individual to whom it is addressed. It may
contain privileged or confidential information and should not be
circulated or used for any purpose other than for what it is intended. If
you have received this message in error, please notify the originator
immediately. If you are not the intended recipient, you are notified that
you are strictly prohibited from using, copying, altering, or disclosing
the contents of this message. Aricent accepts no responsibility for loss
or damage arising from the use of the information transmitted by this
email including damage from virus."
.+-}*?+??|0รน
_??=?o?+*iz????2?j;pj7?r ?N?1?m???_???1*iz??Y?!w+-}?7+{w(
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
