If a network is using a shared baseband link (such as Ethernet, wireless, etc.) InterMapper compares the sum of the transmitted and received bytes/second against the link speed to get the utilization. If it's a full-duplex link (such as a frame relay, T-1 or T3, ATM, etc.) then InterMapper compares the higher of the transmitted or received data rate against the link speed.
Regards, Janice Losgar Dartware, LLC On Jan 8, 2010, at 12:38 PM, gsemens wrote: > One last thing. Now the utilization seems extremely low. This is a gig > ethernet interface. Should I have the Link Speed set for 1G TX and 1G RX and > also check Full Duplex? ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [email protected]
