Is it possible to damage the board with 3.3 instead of using VIN(5V) ? 3.3 should not have effect on regulators but I am not sure. Only Ytai can help you.
6 Şubat 2014 Perşembe 19:14:53 UTC+2 tarihinde Ferris yazdı: > > Could be that your 5v regulator has stopped working. If you check the 5V > pin with a multimeter what does it show? > > On Thursday, February 6, 2014 5:11:02 PM UTC, ioioROOKIE wrote: >> >> I have lots of IOIO V1 and using them for R&D, I realized that some of >> IOIO V1 works only with 3.3v instead of vin, usb debugging never work if I >> try with 5v pins. However, it works perfect with 3.3v pins (which is >> intented to be a pin for output). Though I upgraded the firmware from 3.04 >> to 3.11 nothing changes. Any ideas? >> Thanks in Advance >> > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
