I've tested and measured 5v from pins and also measured 3.3v from analog pins while 5v adapter is connected. Ytaiiiiii :)
On Friday, February 7, 2014 3:16:51 PM UTC+2, Greenteamsah wrote: > > Is it possible to damage the board with 3.3 instead of using VIN(5V) ? 3.3 > should not have effect on regulators but I am not sure. Only Ytai can help > you. > > 6 Şubat 2014 Perşembe 19:14:53 UTC+2 tarihinde Ferris yazdı: >> >> Could be that your 5v regulator has stopped working. If you check the 5V >> pin with a multimeter what does it show? >> >> On Thursday, February 6, 2014 5:11:02 PM UTC, ioioROOKIE wrote: >>> >>> I have lots of IOIO V1 and using them for R&D, I realized that some of >>> IOIO V1 works only with 3.3v instead of vin, usb debugging never work if I >>> try with 5v pins. However, it works perfect with 3.3v pins (which is >>> intented to be a pin for output). Though I upgraded the firmware from 3.04 >>> to 3.11 nothing changes. Any ideas? >>> Thanks in Advance >>> >> -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
