I never said that there's no damage in supplying *5V* on the 3.3V pins. I was assuming when you were talking about supplying power on the 3.3V pins you meant supplying *3.3V* on the 3.3V pins...
On Mon, Feb 10, 2014 at 11:59 PM, ioioROOKIE <[email protected]> wrote: > So, I'm confused. You're saying that there is no damaging supplying 5v on > 3.3v rail(output) but at the same time you are saying that > Is be very surprised if this didn't damage your PIC.? > I'm totally confuesd as a rookie :/ > Help me :) > > On Thursday, February 6, 2014 7:11:02 PM UTC+2, ioioROOKIE wrote: > >> I have lots of IOIO V1 and using them for R&D, I realized that some of >> IOIO V1 works only with 3.3v instead of vin, usb debugging never work if I >> try with 5v pins. However, it works perfect with 3.3v pins (which is >> intented to be a pin for output). Though I upgraded the firmware from 3.04 >> to 3.11 nothing changes. Any ideas? >> Thanks in Advance >> > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/groups/opt_out. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
