Hello all IOIO users. My IOIO-OTG had application firmware version 0300 and was working fine at first. Recently I have upgraded its application firmware to version 0500 so I used ioiodude to do it and the operation was aparently successfull (....... Done.). However now when I try to connect it to my PC in bootloader mode the PC recognizes it and shows me the COM port but when in application mode it simply doesn't recognizes it and gives me an USB error... Also, the IOIO-OTG doesn't communicate with my smartphone anymore... But the red light still turns on! I can read the bootloader firmware version with ioiodude but not the application firmware because the command line freezes when I try to do this... What could be wrong? Is it possible that I fried the IOIO-OTG? I am thinking of that "H-A" switch because I read somewhere that we should connect the IOIO-OTG to the PC in "A" position... and I can't remember if I put it in "H" or "A" position when I upgraded the application firmware... Can you tell me what is the problem? Any help would be appreciated.
-- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
