That's what I've done yesterday. I've bought another one. I hope now that this one will be upgraded with no problems. I will do it in A position with no external supply because the board that is OK has been upgraded that way. Thank you for your offer Chad but I live in Portugal. You are a nice guy. I will attempt to do other procedures in order to fix these two boards... I will post here updates if I succeed because this seems to be a common issue. If Ytai has personal time for that it would be great if he posted a section with a title like "What you must do before upgrading/downgrading IOIO firmware" in the beggining of this page: https://github.com/ytai/ioio/wiki/IOIO-OTG-Bootloader-and-IOIODude. In a short text he could warn IOIO users what position of the H-A switch they must use before connecting to the PC and if they should use external supply or not. Because I think that many users find this confusing and then mistakes occur. Btw, Ytai please correct the link in the sentence "The first thing to do is to grab the latest version of IOIODude <https://github.com/ytai/ioio/raw/master/release/apps/IOIODude-0100.zip>" of the same page to version 1.2. I guess you missed it.
Thank you all for your responses and feel free to keep trying to solve this issue. I will do the same. Segunda-feira, 22 de Setembro de 2014 2:27:49 UTC+1, Chad Kennedy escreveu: > > Well, short of sending both to someone who has done it before and has a > known go physical setup. You may have only one option, buy another one or > two... > > I would be willing to try the updates for you if you pay for shipping both > ways. This assumes shipping is reasonable and you are in the U.S. > > Maybe time will pass and you'll have an "Ah ha" moment. Maybe buys some > fresh 9V and try the flashing. A fresh 9V should be enough to at least > flash. > > > On 9/21/2014 4:58 PM, AF wrote: > > I see your point Chad. Actually now I am trying to upgrade/downgrade the > firmware in A position + external supply (USB 5V 1A to IOIO JST connector, > homemade adaption made by myself, works fine) but still no luck... I don't > know what to do anymore... I think I have tried almost everything! > > Domingo, 21 de Setembro de 2014 22:49:44 UTC+1, Chad Kennedy escreveu: >> >> >> My experience with PIC chips has taught me that "not enough power" >> during the burn/flash/programming time will give significantly >> inconsistent results. Your problem is sounding more like that since >> you've basically done it on two IOIOs and not a procedural problem like >> I faced. At the time of updating the firmware there was insufficient >> power applied or the IOIO was in H instead of A - these are my theories. >> I would encourage you to re-update and/or roll back to a prior >> versionsV0330. fwiw I used a 9V battery and it did not last long >> powering the IOIO OTG or for that matter any PIC chips from my projects >> I used prior during the flasing process. I dropped it quickly and found >> a usb power supply terminated pins on it and connected the IOIO. My plug >> runs 5V DC @ 2A. Try updating again verifying all power needs. I am >> going way out on a limb for this IOIO OTG PIC model but I know my other >> PICs require 12+ Volt minimum to achieve a good flashing, the PC's USB >> will provide some power, but is likely needing to be supplemented with >> external. Again stating this from experience and not looking at the >> IOIO's PIC's specifications/requirements. >> >> >> On 9/21/2014 2:12 PM, AF wrote: >> > black7, >> > >> > Both boards are showing inconsistent behaviour. I only managed once to >> show the app firmware on ioiodude for one of the boards (don't know why it >> worked that time, the procedure was the same for both boards). Now I can't >> show it for both boards and one of them sometimes works with my smartphone >> other times doesn't. The other one doesn't work at all. This makes no sense >> I know... >> > And about upgrading the firmware with the external power supply: that's >> what I was trying to say on the first post, it is highly probable that I've >> done that and also with H position on switch... I can't remember but I >> think I've done it. >> > At first the COM ports only appeared in H position. And when in A >> position they appeared as unknown devices. Now after I did all those tries >> and procedures I managed to make them recognized as COM ports in both H or >> A positions. >> > >> >> ____________________________________________________________ >> The End of the "Made-In-China" Era >> The impossible (but real) technology that could make you >> impossibly rich. >> http://thirdpartyoffers.netzero.net/TGL3241/541f47d59ba4247d57d79st03duc >> > -- > You received this message because you are subscribed to a topic in the > Google Groups "ioio-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/ioio-users/qY-fe0ikwLs/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected] <javascript:>. > To post to this group, send email to [email protected] > <javascript:>. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > > > ____________________________________________________________ > > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
