Consider powering the sharp off of the IOIO 5V as well as the logic supply of the L293. This will allow you to use a higher Vin which will affect the motor speed but not damage any of the electronics that require 5V. Also consider that pin 8 is not PWM capable in case you wanted that. Hello,
I am novice, my IOIO Robot is composed by following items : - "IOIO-OTG" board - Base robotic "OL1" with 2 Motor DC 6V - Bridge H L293D - Servomotor Dagu RS001 time motion. 60° @ 4,8V/6V : 0,10 s - Servomotor "Nano-S" time motion. 40° @ 4,8V/6V : 0,12 s/0,10 s - Infrared sensor SHARP™ "GP2YOA51SK" Is it ok ? <http://fritzing.org/media/fritzing-repo/projects/a/ailgorbot-1/images/Ailgorbot%20T.01.jpg> -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
