Use ESC (electronic speed controller), if you have brushless motor, you have to use brushless controller, Then connect it to IOIO P-pin like any servo and use IOIO PWM functions. There is however one strange thing when connecting ESC to IOIO: the ESC has a 3-pin connector like a standard servo, +,- and control. If you connect + and - to IOIO 5V, the ESC powers IOIO ! if you do not want that happen, connect only the control pin to IOIO PWM-pin.
tiistai 19. toukokuuta 2015 11.25.49 UTC+3 M. A. kirjoitti: > > Good day IOIO fans, > > As part of my project, I have to build an Android app to control the speed > of a servo motor, of course using the IOIO OTG, and I have to do that as > fast as possible. So I would be extremely grateful for any of you who could > point me to some resources or similar projects. > > I had a look on the IOIO Wiki but didn't find it enough for me. > > Many thanks in advance > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
